NETGEAR M4200 Software Administration Manual page 600

A screen similar to the following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
9. Enable PIM-SM globally.
a. Select Routing > Multicast > PIM > Global Configuration.
A screen similar to the following displays.
b. For PIM Protocol Type, select the PIM-SM radio button.
c. For Admin Mode, select the Enable radio button.
d. Click Apply.
10. Enable PIM-SM on interfaces 1/0/21, 1/0/22, and 1/0/24.
a. Select Routing > Multicast > PIM > Interface Configuration.
Managed Switches
PIM
600