NETGEAR M4200 Software Administration Manual page 176
M4200 and m4300 series prosafe managed switches
Hide thumbs
Also See for M4200:
- Hardware installation manual (33 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
5.
Add a static route with IP address 192.268.40.0/24:
a. Select Routing > Routing Table > Basic > Route Configuration.
A screen similar to the following displays.
b. Under Configure Routes, make the following selection and enter the following
information:
•
In the Route Type list, select Static.
•
In the Network Address field, enter 192.168.40.0.
•
In the Subnet Mask field, enter 255.255.255.0.
•
In the Next Hop IP Address field, enter 192.168.200.2.
c. Click Add.
6.
Create a static route with IP address 192.168.50.0/24:
a. Select Routing > Routing Table > Basic > Route Configuration.
A screen similar to the following displays.
b. Under Configure Routes, make the following selection and enter the following
information:
•
In the Route Type list, select Static.
•
In the Network Address field, enter 192.168.50.0.
•
In the Subnet Mask field, enter 255.255.255.0.
•
In the Next Hop IP Address field, enter 192.168.200.2.
c. Click Add.
Managed Switches
ACLs
176
Hide quick links:
Advertisement
Table of Contents
