NETGEAR M4200 Software Administration Manual page 656

A screen similar to the following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
7. Enable DVMRP on the interface.
a. Select Routing > Multicast > DVMRP > Interface Configuration.
A screen similar to the following displays.
b. Scroll down and select the Interface 1/0/3, 1/0/11, and 1/0/24 check boxes.
c. Select Enable in the Interface Mode field.
d. Click Apply to save the settings.
8. Enable IGMP on the switch.
a. Select Routing > Multicast > IGMP > Global Configuration.
A screen similar to the following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
Managed Switches
DVMRP
656