A screen similar to the following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
6.
Enable DVMRP on the switch.
a. Select Routing > Multicast > DVMRP > Global Configuration.
A screen similar to the following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
7.
Enable DVMRP on the interface.
a. Select Routing > Multicast > DVMRP > Interface Configuration.
A screen similar to the following displays.
b. Scroll down select the Interface 1/0/1, 1/0/13, and 1/0/21 check boxes.
c. In the Interface Mode field, select 300.
Managed Switches
DVMRP
650