NETGEAR M4200 Software Administration Manual page 34

A screen similar to the following displays.
b. Enter the following information:
• In the Group ID field, enter 2.
• In the Group Name field, enter vlan_ip.
• In the Protocol list, select IP and ARP while holding down the Ctrl key.
• In the VLAN field, enter 5.
c. Click Add.
4. Add port 11 to the group vlan_ipx.
a. Select Switching > VLAN > Advanced > Protocol Based VLAN Group
Membership.
A screen similar to the following displays.
b. In the Group ID list, select 1.
c. Click the gray box under port 11. A check mark displays in the box.
d. Click the Apply button.
Managed Switches
VLANs
34