Web Interface: Assign Vlans Using Radius - NETGEAR M4200 Software Administration Manual

Web Interface: Assign VLANS Using RADIUS

1. Assign the IP address for the web management interface.
a. Select System > Management > Network Interface > IPv4 Network
Configuration.
A screen similar to the following displays.
b. For Current Network Configuration Protocol, select the None radio button.
c. In the IP Address field, enter 192.168.0.5.
d. In the Subnet Mask field, enter 255.255.255.0.
e. Click Apply.
2. Create VLAN 2000.
a. Select Switching > VLAN > Basic > VLAN Configuration.
A screen similar to the following displays.
b. In the VLAN ID field, enter 2000.
c. In the VLAN Type field, select Static.
d. Click Add.
3. Set force authorized mode on ports 1/0/6 and 1/0/12.
a. Select Security > Port Authentication > Advanced > Port Authentication.
Managed Switches
Security Management
329