NETGEAR M4200 Software Administration Manual page 561

2. Enable IGMP on port 1/0/24.
(Netgear Switch) (Config)#interface 1/0/24
(Netgear Switch) (Interface 1/0/24)#routing
(Netgear Switch) (Interface 1/0/24)#ip pim
(Netgear Switch) (Interface 1/0/24)#ip igmp
(Netgear Switch) (Interface 1/0/24)#ip rip
(Netgear Switch) (Interface 1/0/24)#ip address 192.168.4.1
(Netgear Switch) (Interface 1/0/24)#exit
3. PIM-DM builds the multicast routes table on each switch.
(A) #show ip mcast mroute summary
Multicast Route Table Summary
Source IP Group IP
----------- ----------
192.168.1.1 225.1.1.1
(B) #show ip mcast mroute summary
Multicast Route Table Summary
Source IP Group IP
----------- ---------
192.168.1.1 225.1.1.1
(C) #show ip mcast mroute summary
Multicast Route Table Summary
Source IP Group IP
----------- ---------
192.168.1.1 225.1.1.1
(D) #show ip mcast mroute summary
Multicast Route Table Summary
Source IP Group IP
---------- ---------
192.168.1.1 225.1.1.1
Managed Switches
Incoming
Protocol Interface
---------- ---------
PIMDM 1/0/13
Incoming
Protocol Interface
---------- ---------
PIMDM 1/0/10
Incoming
Protocol Interface
-------- ---------
PIMDM 1/0/21
Incoming
Protocol Interface
-------- ----------
PIMDM 7/0/21
PIM
561
255.255.255.0
Outgoing
Interface List
---------------
1/0/1
Outgoing
Interface List
---------------
Outgoing
Interface List
---------------
Outgoing
Interface List
---------------
7/0/24