NETGEAR M4200 Software Administration Manual page 501

A screen similar to the following displays.
b. In the Group Name field, enter group2.
c. In the Group ID field, enter 2.
d. In the Group Mode field, select isolated.
e. Click Add.
7. Add ports 16 and 17 to group2.
a. Select Security > Traffic Control > Private Group VLAN > Private Group VLAN >
Private Group Membership.
A screen similar to the following displays.
b. In the Group ID list, select 2.
c. Click Unit 2. The ports display.
d. Click the gray boxes under ports 16 and 17, and a check mark displays in each box.
e. Click Apply.
Managed Switches
DVLANs and Private VLANs
501