NETGEAR M4200 Software Administration Manual page 298

2. Enable MVR, configure VLAN 999 as a multicast VLAN, and add group 224.1.2.3 to MVR.
(Netgear Switch) #config
(Netgear Switch) (Config)#mvr
(Netgear Switch) (Config)#mvr vlan 999
(Netgear Switch) (Config)#mvr group 224.1.2.3
3. Configure MVR in dynamic mode.
(Netgear Switch) (Config)#mvr mode dynamic
4. Configure multicast VLAN on the source port.
(Netgear Switch) (Config)#interface 0/9
(Netgear Switch) (Interface 0/9)#vlan participation include 999
(Netgear Switch) (Interface 0/9)#vlan tagging 999
(Netgear Switch) (Interface 0/9)#mvr
(Netgear Switch) (Interface 0/9)#mvr type source
(Netgear Switch) (Interface 0/9)#exit
5. Configure the receive ports.
Note: A receive port can participate in only one VLAN.
Managed Switches
MVR
298