Web Interface: Configure A Dhcp Server That Assigns A Fixed Ip Address - NETGEAR M4200 Software Administration Manual
M4200 and m4300 series prosafe managed switches
Hide thumbs
Also See for M4200:
- Hardware installation manual (33 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
Web Interface: Configure a DHCP Server that Assigns a Fixed IP
Address
1.
Select System > Services > DHCP Server > DHCP Server Configuration.
A screen similar to the following displays.
2.
For Admin Mode, select the Enable radio button.
3.
Click Apply to enable the DHCP service.
4.
Select System > Services > DHCP Server > DHCP Pool Configuration.
A screen similar to the following displays.
5.
Under DHCP Pool Configuration, enter the following information:
•
In the Pool Name list, select Create.
•
In the Pool Name field, enter pool_manual.
•
In the Type of Binding list, select Manual.
•
In the Client Name field, enter dhcpclient.
•
In the Hardware Address field, enter 00:01:02:03:04:05.
Managed Switches
DHCP Server
470
Hide quick links:
Advertisement
Table of Contents
