NETGEAR M4200 Software Administration Manual page 482

A screen similar to the following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply to save the settings.
5. Create a DHCPv6 pool.
a. Select System > Services > DHCP Server > DHCPv6 Pool Configuration.
A screen similar to the following displays.
b. From the Pool Name list, select Create.
c. In the Pool Name field, enter ipv6_server.
d. In the DNS Server Addresses fields, enter 20011:9:18::1 (which is the IPv6
address of the DNS server).
e. Click Apply to save the settings.
6. Enable DHCPv6 pool on interface 2/0/21.
a. Select System > Services > DHCPv6 Server > DHCPv6 Interface Configuration.
Managed Switches
DHCPv6 Server
482