NETGEAR M4200 Software Administration Manual page 107

M4200 and m4300 series prosafe managed switches

Hide thumbs Also See for M4200:

Table of Contents

b. Scroll down and select the interface 1/0/2 check box.

Now 1/0/2 appears in the Interface field at the top.

In the OSPF Area ID field, enter 0.0.0.2.

In the OSPF Admin Mode field, select Enable.

In the Priority field, enter 128.

In the Metric Cost field, enter 32.

c. Click Apply to save the settings.

Enable OSPF on port 1/0/3.

a. Select Routing > OSPF > Advanced > Interface Configuration.

A screen similar to the following displays.

b. Scroll down and select the interface 1/0/3 check box.

Now 1/0/3 appears in the Interface field at the top.

In the OSPF Area ID field, enter 0.0.0.3.

In the OSPF Admin Mode field, select Enable.

In the Priority field, enter 255.

In the Metric Cost field, enter 64.

c. Click Apply to save the settings.

Managed Switches

Show Quick Links

Table of Contents