K Troubleshooting; Jam Display; List Of Jam Display; Jam Display Resetting Procedure - Konica Minolta BIZHUB C3100P Service Manual

K TROUBLESHOOTING

1. JAM DISPLAY

1.1 Jam display
• When a paper jam occurs a message is displayed on the control panel.
PAPER JAM
TRAY2
for help

1.2 List of JAM display

Display
LCD 1 LCD 2
PAPER JAM FUSER/EXIT
SECOND
TRANS
VERTICAL
TRANS
DUPLEX1
DUPLEX2
MANUAL
TRAY1
TRAY2 *1
Service Call: F001
• *1: Only when the optional lower feeder unit is mounted.

1.3 Jam display resetting procedure

• Open the relevant cover, clear the sheet of misfed paper, and close the cover.
• Turn the power switch OFF and ON.

1.4 Sensor layout

• bizhub C3100P with the optional lower feeder unit.
Jam location
• Fusing/exit section
• Transfer section
• Vertical transport
• Duplex paper feed section
• Duplex transport section
• Manual tray paper feed
• Tray1 paper feed
• Tray2 paper feed
• Vertical transport
• Paperjam in control logic
K TROUBLESHOOTING > 1. JAM DISPLAY
Jam processing location
• Right side cover
• Fusing unit
• Right side cover
• Right side cover
• Tray2 right side cover
• Duplex door
• Manual feed tray
• Right side cover
• Tray1
• Right side cover
• Tray2 right side cover
-
[1]
[2]
[3]
[4]
[5]
K-1
Action
K.1.5.2 Jam at fusing/exit section
K.1.5.3 Jam at transfer section
K.1.5.7 Jam at tray2 vertical conveyance
section
K.1.5.9 Jam at duplex paper feed section
K.1.5.8 Jam at duplex paper transport
section
K.1.5.4 Jam at manual tray paper feed
section
K.1.5.5 Jam at tray1 paper feed section
K.1.5.6 Jam at tray2 paper feed section
K.1.5.10 Paper jam in control logic