2Nd Transfer Roller New Article Detection; Image Processing - Konica Minolta BIZHUB C3100P Service Manual

[A]
[1]
[B]
[1]
[A] Cover open
[1] IDC sensor cover
[3] 2nd transfer pressure solenoid

7.3.8 2nd transfer roller new article detection

• The 2nd transfer roller is not provided with any new article detection mechanism. Whenever the 2nd transfer roller has been replaced with a
new one, the following steps must be performed: in the service mode, select [COUNTER] -> [LIFE] -> [REPLACE] -> [TRANS. ROLLER]
and select [YES] to reset the counter.

7.3.9 Image processing

• The following image stabilization function is available as they relate to the 2nd transfer section. For more details, see
• IDC sensor output correction
[3]
[2]
O-23
O THEORY OF OPERATION bizhub C3100P > 7. 2ND TRANSFER
[B] Cover close
[2] Cam
- -
SECTION
O.15.1 Outline.