G.5.11 Printer control board (PRCB)
9. Remove the high voltage unit.
G.5.13 High voltage unit (HV1)
10. Remove the power supply cooling fan.
G.5.21 Power supply cooling fan (FM10)
[2]
[1]
[3]
[1]
[1]
[2]
[1]
[1]
[2]
[1]
[1]
[2]
[3]
G DISASSEMBLING/REASSEMBLING > 5. Disassembly/reassembly
11. Remove the screw [1], and remove the exit drive assy [2].
12. Disconnect two connectors [3].
13. Remove the harness from fourteen wire saddles [1].
14. Unlock two tabs [1], and remove the harness guide [2].
15. Remove eight screws [1], and remove the DC power supply
protective cover [2].
16. Remove two screws [1], and remove the power supply cooling fan
cover [2].
G-26
procedure (b...