Firmware Upgrading Procedure By Usb Memory Device; Preparations For Firmware Rewriting; System Requirements; Saving The Firmware Data Into The Usb Memory Device - Konica Minolta BIZHUB C3100P Service Manual

2. Firmware upgrading procedure by USB memory device

2.1 Preparations for firmware rewriting

2.1.1 System requirements

• PC equipped with a USB port
• USB memory device

2.1.2 Saving the firmware data into the USB memory device

1. Save the firmware data in appropriate space in the PC.
2. Connect the USB memory device to the PC.
3. Create a "firmware" folder immediately under the drive of the USB memory device.
4. Copy the firmware data (***.prn) in the firmware folder created in step 3.
NOTE
• Be sure to save the firmware data in "drive:/firmware/***.prn."
• The printer can display up to 20 files of firmware data during upgrading.

2.2 How to write firmware data

1. Turn the power switch ON.
2. Connect the USB memory device to the printer.
3. Call the SERVICE MODE to the display.
4. Select [FIRMWARE UPDATE] and press the Menu/Select key.
A list of firmware data in the USB memory device is displayed.
FIRMWARE UPDATE
EXIT
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
NOTE
• Before upgrading firmware, use [VIEW INFORMATION] to check that the firmware data is correct.
5. Select the specific firmware data to be upgraded and press the Menu/Select key.
6. Select [EXECUTE] and press the Menu/Select key.
XXXXXXXXXXXXXXXX
VIEW INFORMATION
EXECUTE
CANCEL
7. Select [YES] and press the Menu/Select key.
XXXXXXXXXXXXXXXX
YES
NO
8. The firmware upgrading procedure starts.
J REWRITING OF FIRMWARE > 2. Firmware upgrading procedure by
J-2
USB memo...