Replacing The Tray1 Feed Roller - Konica Minolta BIZHUB C3100P Service Manual

[1]
[2]
[1]
[2]
[1]
[1]

5.4.3 Replacing the tray1 feed roller

(1) Periodically replacing parts/cycle
Tray1 feed roller: Every 300,000 counts
(2) Procedure
1. Remove the tray1.
[1]
[2]
F MANTENANCE > 5. PERIODICAL MAINTENANCE PROCEDURE
4. Remove two springs [1].
5. Remove six screws [1], and remove the manual tray feed roller
assy [2].
6. Remove the spring [1], and remove the manual tray separation
roller assy [2].
7. Remove the C-ring [1], and remove the manual tray separation
roller [2].
8. To reinstall, reverse the order of removal.
F-16