Step
8
Change PRCB.
2.3.3 Color Registration Adj. (Test Pattern Error)
(1) Contents
• Transfer belt unit
• PH unit
(2) Procedure
Step
1
Wipe clean the surface of the transfer belt with a soft cloth, if it is dirty.
2
Change the image
3
Change
PH
4
Change PRCB.
5
Change MFPB.
2.3.4 Color Registration Adj. (Adj. Value Error)
(1) Contents
• IDC sensor (IDCS)
(2) Procedure
Step
1
Slide out the imaging unit and reinstall it in position.
2
Reinstall or reconnect IDCS if it is installed or connected improperly.
3
Change IDCS.
4
Change PRCB.
2.3.5 LD Error
(1) Contents
• Erase LED/Y (EL/Y)
• Erase LED/M (EL/M)
• Erase LED/C (EL/C)
• Erase LED/K (EL/K)
(2) Procedure
Step
1
Change
PH
2
Change MFPB.
3
Change PRCB.
transfer belt unit
if the transfer belt is damaged.
unit.
unit.
K TROUBLESHOOTING > 2. PROCESS CAUTION INFRORMATION
Action
Relevant parts
• Printer control board (PRCB)
• MFP board (MFPB)
Action
Relevant parts
• Printer control board (PRCB)
Action
Relevant parts
• PH unit
• MFP board (MFPB)
• Printer control board (PRCB)
Action
K-9