Tray Open/Close Detection Control; Paper Jam Detection Control - Konica Minolta BIZHUB C3100P Service Manual

[A]
[B]
[A] When paper is loaded
[1] Tray1 paper empty sensor (PS2)

10.3.5 Tray open/close detection control

• The tray1 set sensor detects a tray in the open or closed position.
• The detection plate of tray1 blocks or unblocks the tray1 set sensor, which allows the main body to determine that tray1 is in place or not.
[1]
[1] Tray detection plate

10.3.6 Paper jam detection control

• If the registration sensor is not activated within a predetermined period of time after a paper feed sequence has been started, the main body
determines that there is a paperjam. It then gives the message "PAPER JAM TRAY 1" on the panel.
• The paperjam display can be reset by opening and closing any of the doors.
[1]
[2]
O THEORY OF OPERATION bizhub C3100P > 10. PAPER FEED
[2]
[B] A paper empty condition
[2] Empty sensor actuator
[2] Tray1 set sensor (PS1)
O-33
SECTION (TRAY 1)