Replacing The Tray2 Feed Roller; Replacing The Tray2 Separation Roller - Konica Minolta BIZHUB C3100P Service Manual

[1]
[1]
5. To reinstall, reverse the order of removal.

5.4.5 Replacing the tray2 feed roller

(1) Periodically replaced parts/ cycle
• Tray2 feed roller: Every 300,000 counts
(2) Procedure
1. Slide out tray2.
[1] [4]
[2] [3]

5.4.6 Replacing the tray2 separation roller

(1) Periodically replacing parts/cycle
Tray2 separation roller: Every 300,000 counts
(2) Procedure
1. Pull out the tray2/tray3.
[2]
[2]
F MANTENANCE > 5. PERIODICAL MAINTENANCE PROCEDURE
3. Remove the tray 1 separation roller assy [1].
4. Remove the C-ring [1], and remove the tray 1 separation roller [2].
2. Lock the paper lifting metal plate [1].
3. Remove two C-clips [2] and the bearing [3] at the front, and
remove the tray2 feed roller [4].
F-18