Brush Effect, Image Bleeding - Konica Minolta BIZHUB C3100P Service Manual

[1]
[1] Poor fusing performance
(2) Troubleshooting procedure
Step Section
1 Paper
2 Fusing Temperature
3

5.2.18 Brush effect, Image bleeding

(1) Typical faulty images
The arrow in the exemplary image troubles indicates the paper feeding direction.
[1]
[1] Brush effect
(2) Troubleshooting procedure
Step Section
1 Paper
2
3 Fusing unit
4
5
[2]
Check item
Paper type does not match.
Select [Service Mode] -> [MACHINE] ->
[TEMPERATURE] and change the setting, and the image
trouble is eliminated.
The problem has been eliminated through the checks of
steps up to 2.
[2]
Check item
Paper is damp.
Paper type does not match.
Fusing unit is installed properly.
Fusing entrance guide plate is dirty.
Fusing belt is dirty or scratched.
K TROUBLESHOOTING > 5. IMAGE QUALITY PROBLEM
[2] Offset
Result
YES
YES
[2] Image bleeding
Result
YES
YES
YES
YES
K-36
Action
Change the setting.
Go to the next step.
NO Replace the fusing unit.
Action
Change paper to one just unwrapped
from its package.
Change the setting.
NO Reinstall.
Clean.
Replace the fusing unit.