Konica Minolta BIZHUB C3100P Service Manual page 96

[2] [1]
[3] [2]
[2] [1]
[1]
[1]
[1]
[3] [2]
12. Open the right door.
[4]
[7]
[3]
[1]
[2]
[6]
[5]
G DISASSEMBLING/REASSEMBLING > 5. Disassembly/reassembly
6. Remove the harness from eight wire saddles [1].
7. Remove two screws [2], and remove the metal plate [3].
8. Disconnect all connectors and flat cables on the MFP board.
9. Remove nine screws [1], and remove the MFP board assy [2].
10. Remove the harness from the wire saddle [1].
11. Remove the screw [2], and remove the earth cable [3].
13. Remove the screw [1], and remove the fixed cover [2].
14. Remove the spring [3].
15. Remove four screws [4], and remove the harness cover [5].
16. Remove the spring [6].
17. Remove the conveyance unit [7].
G-23
procedure (b...