Konica Minolta BIZHUB C3100P Service Manual page 21

(3) Power Plug and Cord
• When using the power cord set (inlet type)
that came with this product, make sure the
connector is securely inserted in the inlet of
the product.
When a securing measure is provided,
secure the cord with the fixture properly.
If the power cord (inlet type) is not
connected to the product securely, a
contact problem may lead to increased
resistance, overheating, and risk of fire.
• Do not allow the power cord to be stepped on
or pinched.
Overheating may occur there, leading to a
risk of fire.
• Check whether the power cord is damaged.
Check whether the sheath is damaged.
If the power plug, cord, or sheath is
damaged, replace with a new power cord
(with plug and connector on each end)
specified by KM. Using the damaged power
cord may result in fire or electric shock.
• Do not bundle or tie the power cord.
Overheating may occur there, leading to a
risk of fire.
• Check whether dust is collected around the
power plug and wall outlet.
Using the power plug and wall outlet
without removing dust may result in fire.
• Do not insert the power plug into the wall
outlet with a wet hand.
The risk of electric shock exists.
A SAFETY AND IMPORTANT WARNING ITEMS > 3. SAFETY
WARNING
A-9
WARNINGS