5.27 Switchback roller feed clutch (CL11) / Switchback roller reverse clutch (CL12)
1. Remove the fuser unit.
F.5.3.1 Replacing the fuser unit
2. Remove the exit cover.
G.5.4 Exit cover
3. Remove the waste toner bottle.
F.5.2.1 Replacing the waste toner bottle
4. Remove the left cover.
G.5.2 Left cover
5. Remove the rear cover.
G.5.1 Rear cover
6. Remove the operation panel.
G.5.6 Operation panel
7. Remove the upper cover1/ upper cover2.
G.5.7 Upper cover1/ Upper cover2
8. Remove the cooling fan motor.
G.5.22 Cooling fan motor (FM11)
[2]
[1]
[3]
[1]
[3]
[3]
[1]
[2]
[3]
[2]
G DISASSEMBLING/REASSEMBLING > 5. Disassembly/reassembly
9. Remove the screw [1], and remove the exit drive assy [2].
10. Disconnect two connectors [3].
11. Remove the screw [1].
12. While pushing the tab [2] in the direction of the arrow to unlock it,
disassemble and remove the exit drive assy [3].
13. Disconnect two connectors [1].
14. Remove two E-rings [2] and two bushings [3].
G-28
procedure (b...