5.3 Fusing section
5.3.1 Replacing the fuser unit
(1) Periodically replaced parts/cycle
Fuser unit: Every 100,000 images (2 pages/job)
(2) Procedure
1. Turn OFF the power switch, unplug the power cord from the power outlet, and let the machine to stand idle for about 20 min.
[1]
[1]
CAUTION
• The temperature gets high in the vicinity of the fuser
unit. You may get burned when you come into contact
with the area. Before replacement operations, make
sure that more than 20 minutes have elapsed since
the main and sub power switches were turned off.
[1]
F MANTENANCE > 5. PERIODICAL MAINTENANCE PROCEDURE
2. Open the right door [1].
3. Open the eject cover [1].
4. Open the fuser unit cover [1].
F-12