Konica Minolta BIZHUB C3100P Service Manual page 65

[1]
[1]
[1]
[2]
[2]
[1]
13. To reinstall, reverse the order of removal.
14. From the Menu, select [SERVECE MODE] -> [COUNTER] -> [LIFE] -> [REPLACE] -> [TRANS. BELT] and execute this function to reset
the transfer belt unit counter value.
I.3.7.2 LIFE-REPLACE-TRANS. BELT
15. From the Menu, select [ADMIN SETTINGS] -> [QUALITY MENU] -> [CARIBRATION] -> [AIDC PROCESS] and execute this function.
[1]
F MANTENANCE > 5. PERIODICAL MAINTENANCE PROCEDURE
8. Hold the handles, and then carefully pull out the transfer belt unit
[1].
9. Remove the protective cover [1] from the new transfer belt unit.
NOTE
• Be careful not to touch the surface of the belt.
10. Insert the transfer belt unit [2] along the rails [1].
11. Hold the both handles [1] and raise the guide [2].
12. Pull the protective sheet [1] out.
F-11