Starting/Exiting; Starting Procedure; Exiting Procedure; Machine - Konica Minolta BIZHUB C3100P Service Manual

TE CLEAR
CARIBRATION
COVERAGE
COUNTER LIFE
PRINT MENU MANAGEMENT LIST
HALFTONE 64
HALFTONE 128
HALFTONE 256
GRADATION
STATE SENSOR CHECK
COMPONENT CHECK
BK CLEAR
FIRMWARE UPDATE *1
LOADABLE DRV.
LOADABLE DOWNLOAD *1
HDD FORMAT
ENGINE DIPSW

3.2 STARTING/EXITING

3.2.1

STARTING PROCEDURE

NOTE
• Make sure not to reveal the password of the service mode to any unauthorized person.
(1) Procedure
1. Select [COUNTER] on the menu screen and press the Menu/Select key.
2. Press the following keys in this order.
Cancel/Access -> down key -> down key -> Cancel/Access -> down key -> up key
3. Set first digit of password with the up key/down key and press the right key.
4. Repeat the above procedures to set up to eighth digit of password.
Enter "92729272" for service password.
5. Press the Menu/Select key.
3.2.2

Exiting procedure

• Press the Cancel/Access key.

3.3 MACHINE

3.3.1 TEMPERATURE

(1) Use
• To adjust the fusing heating temperature individually for each paper type so as to ensure good fusing performance that varies with varying
environmental conditions.
• When fusing performance is poor, or wax streak or offset occurs when the type of paper is changed or environmental conditions change.
• Use this function when curled paper, or paper jam as a result of the curled paper, occurs under varying environmental conditions or
depending on the type of paper used.
(2) Setting item
PLAIN PAPER
THICK 1
ENVELOPE
(3) Procedure
1. Call [SERVICE MODE] to the display.
REPLACE FUSER UNIT
TRANS. BELT
TRANS. ROLLER
CYAN 64
MAGENTA 64
YELLOW 64
BLACK 64
CYAN 128
MAGENTA 128
YELLOW 128
BLACK 128
CYAN 256
MAGENTA 256
YELLOW 256
BLACK 256
-10 ºC to 0 ºC (step: 5 ºC)
-10 ºC to 0 ºC (step: 5 ºC)
-10 ºC to 0 ºC (step: 5 ºC)
I-9
I ADJUSTMENT/SETTING > 3. SERVICE MODE
I.3.6.5 TE CLEAR
I.3.6.6 CALIBRATION
I.3.6.7 COVERAGE
I.3.7.1 LIFE-REPLACE-FUSER UNIT
I.3.7.2 LIFE-REPLACE-TRANS. BELT
I.3.7.3 LIFE-REPLACE-TRANS. ROLLER
I.3.8.1 MANAGEMENT LIST
I.3.8.2 HALFTONE 64
I.3.8.3 HALFTONE 128
I.3.8.4 HALFTONE 256
I.3.8.5 GRADATION
I.3.9.1 SENSOR CHECK
I.3.9.2 COMPONENT CHECK
I.3.10 BK CLEAR
I.3.11 FIRMWARE UPDATE
I.3.12 LOADABLE DRV.
I.3.13 LOADABLE DOWNLOAD
I.3.14 HDD FORMAT
I.3.15 ENGINE DIPSW