18. "Deactivation Complete" message will be displayed.
The license become invalid at both MFP and LMS, and deactivated token number can be used for another MFP.
4.3.6 License Management - List of Enabled Functions
(1) Functions
• To display activated functions.
(2) Use
• To check the activated functions.
4.3.7 License Management - DEACT. FINISH
(1) Functions
• To display the deactivation finish code and the serial number.
• To print the deactivation finish code and the serial number.
(2) Use
• To check the deactivation finish code and the serial number.
4.4 ADMIN PASSWORD
4.4.1 Use
• To set and change the administrator password.
• Use this function when the administrator forget the administrator password because a new password can be set without entering the current
administrator password with this.
• The administrator password needs to be 8 one-byte alphameric characters and symbols.
4.4.2 Default setting
• 12345678
4.4.3 Procedure
• Enter the password.
1. New Password: Enter the new administrator password.
2. Re-Input Password: Enter the new administrator password again.
I ADJUSTMENT/SETTING > 4. SECURITY SERVICE
I-31