Temperature/ Humidity Sensor (Tem/Hums - Konica Minolta BIZHUB C3100P Service Manual

[1]
[1]
[2]
[1]
[2]
[1]
15. To reinstall, reverse the order of removal.

5.30 Temperature/ humidity sensor (TEM/HUMS)

1. Open the right door.
[2]
[1]
[2]
[1]
4. To reinstall, reverse the order of removal.
[2]
G DISASSEMBLING/REASSEMBLING > 5. Disassembly/reassembly
NOTE
• If the gears come off and they need to be reinstalled, align
the arrow [1] on the gear with the marked line [2] on the
holder.
13. Remove the screw [1], and pull the 2nd transfer release solenoid [2]
out.
14. Disconnect the connector [1], and remove the 2nd transfer release
solenoid.
2. Remove the screw [1] and remove the sensor holder [2] as shown
in the illustration.
NOTE
• Do not jerk off the sensor holder, to which a harness is
connected.
3. Disconnect the connector [1], and remove the temperature/ humidity
sensor [2].
G-32
procedure (b...