Page 1 Quick Start Guide...
Page 2: Table Of Contents
Table of contents Introduction Environmental information......................1-2 Environmental initiatives ........................1-2 ® ENERGY STAR ..........................1-2 ® What is an ENERGY STAR product?....................1-3 Environmental benefits of power management ..................1-3 Recycled paper ...........................1-3 Duplex printing............................1-3 Certification for USA, Canada, Mexico, Brazil and Europe area ..........1-4 For U.S.A.............................1-4 For Canada ............................1-4 For Mexico ............................1-4...
Page 3 About this machine Intended use of office MFP devices ....................2-2 Intended use ............................2-2 Impermissible operating conditions....................2-2 Exclusion of liability..........................2-2 Introduction to user's guide......................2-3 2.2.1 User's Guide CD ..........................2-3 Layout of top page..........................2-4 Operating environment ........................2-4 Viewing the top page ..........................2-4 2.2.2 Target groups............................2-5 2.2.3...
Page 4 Jobs..............................2-33 2.7.1 Job screen ............................2-33 2.7.2 Multi-job function..........................2-33 Loading Paper ..........................2-34 2.8.1 Loading paper in Tray 1 to Tray 2.....................2-34 Applicable paper types ........................2-34 Applicable paper sizes........................2-34 How to load paper ..........................2-34 2.8.2 Loading paper in Tray 3 to Tray 4.....................2-35 Applicable paper types ........................2-35 Applicable paper sizes........................2-35 How to load paper ..........................2-36...
Page 5 3.2.3 Sending data to your Mac computer (SMB Send) ................3-25 Preparation flow ..........................3-25 Operation flow...........................3-25 Checking the cable connection ......................3-26 Checking network settings of this machine ..................3-26 Configuring this machine ........................3-27 Checklist ............................3-27 Checking computer information .......................3-28 Configuring your computer .......................3-28 Registering destinations ........................3-30 Sending the original ..........................3-32 3.2.4...
Page 6 Using the [Quick Security] function .................... 3-82 3.8.1 [Quick Security]..........................3-82 Required settings..........................3-82 Advanced Functions Using advanced functions......................4-2 4.1.1 What are advanced functions? ......................4-2 4.1.2 Association with application .......................4-3 4.1.3 Registering the i-Option license......................4-3 Preparation flow..........................4-3 Enabling the i-Option function ......................4-3 Registering the i-Option license......................4-5 Enabling the i-Option function using the license (Administrator)............4-7 Configuring each function........................4-8...
Page 7 5.3.2 Q2. Can I collectively send data to multiple destinations? ...............5-18 Operation procedure: Selecting multiple addresses from the address book ........5-18 Operation procedure: Directly entering multiple destinations ............5-19 5.3.3 Q3. Can I register multiple sender names displayed on the fax to use them depending on purposes? ............................5-20 How to set: Registering sender names.....................5-20 How to set: Selecting a sender name upon fax transmission............5-21...
Page 8 When printing quality has deteriorated..................6-4 6.2.1 Cleaning the Print Head Glass......................6-4 When the machine cannot be powered on................... 6-6 When the Touch Panel is not visible ..................... 6-7 When a message appears to replace consumables or carry out cleaning ....... 6-8 When staples in the Finisher have run out..................6-8 When the punch scrap box is full .......................6-9 When toner is running out in the Toner Cartridge................6-9...
Page 9 Contents-8 bizhub C759/C659, AccurioPrint C759...
Page 10: Introduction
Introduction...
Page 11: Environmental Information
Environmental information Introduction This [Quick Start Guide] uses illustrations to describe operating procedures for the most commonly used functions in an easy-to-understand way. Start by using this manual to become proficient with the useful functions that this machine offers. For details on the various functions, refer to the User’s Guides on the User’s Guide CD included with this machine.
Page 12: What Is An Energy Star ® Product
Environmental information ® What is an ENERGY STAR product? ® An ENERGY STAR product has a special feature that allows it to automatically switch to a "low-power ® mode" after a period of inactivity. An ENERGY STAR product uses energy more efficiently, saves you money on utility bills and helps protect the environment.
Page 13: Certification For Usa, Canada, Mexico, Brazil And Europe Area
Certification for USA, Canada, Mexico, Brazil and Europe area For U.S.A This product is certified by the following model name in U.S.A. KONICA MINOLTA branded model C504501 (bizhub C759 and bizhub C659). For Canada This product is certified by the following model name in Canada.
Page 14: Safety Information
Safety information Safety information This section contains detailed instructions on the operation and maintenance of this machine. To achieve op- timum utility of this device, all operators should carefully read and follow the instructions in this manual. Please read the following section before connecting the machine to the supply. It contains important infor- mation related to user safety and preventing equipment problems.
Page 15: Power Source Connection
Safety information <Power source connection> Descriptions Graphic symbols Do not use any power cord other than the one supplied in the package or attached on the products. If a power cord is not supplied, use only the power cord and plug that are specified in the user documentation. Failure to use this cord could result in a fire or electrical shock.
Page 16: Installation
Safety information Descriptions Graphic symbols Make sure to ground this product. (Connect the power cord to an electri- cal outlet that is equipped with a grounding terminal.) Failure to do so and an unlikely event of leakage could result in a fire or electrical shock. Descriptions Graphic symbols The outlet must be near the equipment and easily accessible.
Page 17: Using The Product
Safety information Descriptions Graphic symbols Make sure that the power cord is placed on a site in which no person would step on or trip over it. Stepping on or tripping over the power cord could heat the power cord, resulting in a fire or electric shock. Descriptions Graphic symbols <If instructed to use fixing legs>...
Page 18 Safety information Descriptions Graphic symbols Do not keep using this product, if this product becomes inordinately hot or emits smoke, or unusual odor or noise. Immediately turn OFF the pow- er switch, unplug the power cord from the power outlet, and then call your Technical Representative or your authorized service representative.
Page 19: Consumables
Safety information Descriptions Graphic symbols When using the machine, do not look at the light of the lamp for a pro- longed time. Eyestrain could result. Do not use stapled paper, conductive paper (such as silver paper or car- bon paper) or treated heat-sensitive/inkjet paper, otherwise a fire may re- sult.
Page 20 Safety information Descriptions Graphic symbols Never touch the electrical contacts of the units (e.g., toner cartridge and developing unit), as an electrostatic discharge may damage the product. Before handling, see the user documentation for the safety information. <If instructed to replace the fusing unit> The fusing section is extremely hot.
Page 21: Regulation Notices
Regulation notices CE Marking (Declaration of Conformity) for users of the European Union (EU) Hereby, Konica Minolta declares that the radio equipment types mentioned above are in compliance with Di- rective 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: "https://www.konicaminolta.eu/en/business-solutions/support/download-center.html".
Page 22: Interference-Causing Equipment Standard (Ices-003 Issue 5) (For Canada Users)
Regulation notices INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE 5) (for Canada users) This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. For users in countries not subject to class B regulations 7WARNING This is a Class A product.
Page 23: Cdrh Regulations
Regulation notices CDRH regulations This machine is certified as a Class 1 Laser product under Radiation Performance Standard according to the Food, Drug and Cosmetic Act of 1990. Compliance is mandatory for Laser products marketed in the United States and is reported to the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration of the U.S.
Page 24: Acoustic Noise (For European Users Only)
Regulation notices Acoustic noise (for European users only) Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäß EN ISO 7779. Notification for California customers This product uses a CR Lithium Battery which contains perchlorate material. This perchlorate warning applies to perchlorate-containing lithium batteries sold or distributed in California, USA.
Page 25: Telephone Cable (For Users In Countries Subject To Class B Regulations)
Regulation notices Telephone cable (for users in countries subject to class B regulations) Connect a telephone cable with a ferrite core to the telecommunication port of this machine. (Connect the modular jack on the ferrite-core-equipped end of the telephone cable to the telecommunication port.) USB Host Connect USB devices (Memory, Authentication, Hub etc.) devices directly to the USB host.
Page 26: Caution Notations And Labels
Caution notations and labels Caution notations and labels Safety precaution notations and labels appear on this machine at the following positions. Be very careful that an accident does not occur when operations such as removing paper jams and staple jams are performed. NOTICE Do not remove caution labels or notations.
Page 27: Special Notice To User
If trouble is experienced with this equipment FK-516 or FK-515, for repair or warranty information, please contact the Konica Minolta dealer location where you purchased this equipment. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
Page 28: For Europe
Special notice to user Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. If you home has specially wired alarm equip- ment connected to the telephone line, ensure the installation of FK-516 or FK-515 does not disable you alarm equipment.
Page 29: Space Requirements
Space requirements Space requirements To ensure that machine operation, consumables replenishing, part replacement, and regular maintenance can easily be performed, adhere to the recommended space requirements detailed below. 90-1/4 (2292) 56-7/16 (1434) 9-3/8 19-5/8 30-13/16 (782) 50-1/16 (1272) (238) (498) 36-7/8 (936) bizhub C759/C659 + FS-537 SD + RU-515 + PI-507 + LU-205 AccurioPrint C759 + FS-537 SD + RU-515 + PI-507 + LU-205...
Page 30 Space requirements 81-9/16 (2071) 56-7/16 (1434) 15-13/16 19-5/8 26 (660) 39-3/4 (1010) (401) (498) 36-7/8 (936) bizhub C759/C659 + FS-536 SD + RU-515 + LU-303 AccurioPrint C759 + FS-536 SD + RU-515 + LU-303 Unit: inch (mm) 56-9/16 (1436) 46-7/8 (1190) 11-5/8 19-5/8 35-1/4 (895)
Page 31: Operation Precautions
Operation precautions Operation precautions To ensure the optimum performance of this machine, observe the precautions described below. Power source The power source requirements are as follows. Voltage fluctuation: Maximum ^ 10% (at 110 V/120 V/220 to 240 V AC) Frequency fluctuation: Maximum ^ 3 Hz (at 50 Hz/60 Hz) Use a power source with as little voltage or frequency fluctuations as possible.
Page 32: Legal Restrictions On Reproduction
Legal restrictions on reproduction Legal restrictions on reproduction Certain types of originals must never be reproduced with the purpose or intent to pass reproductions of such originals off as the originals. The following is not a complete list, but is meant to be used as a guide to responsible reproduction. <Financial Instruments>...
Page 33: Trademark Acknowledgements
1.10 1.10 Trademark acknowledgements KONICA MINOLTA, the KONICA MINOLTA logo, Giving Shape to Ideas, PageScope, and bizhub are regis- tered trademarks or trademarks of KONICA MINOLTA, INC. Mozilla and Firefox are trademarks of the Mozilla Foundation. Microsoft, Windows, Windows 7, Windows 8.1, and Windows 10 are either registered trademarks or trade- marks of Microsoft Corporation in the United States and/or other countries.
Page 34: Copyright
Note User's Guide may not be reproduced in part or in full without permission. KONICA MINOLTA, INC. will not be held liable for any incidents caused by using this printing system or Us- er's Guide. Information included in User's Guide is subject to change without notice.
Page 35: Software License Agreement
1.11 SOFTWARE LICENSE AGREEMENT This package contains the following materials provided by KONICA MINOLTA, INC. (KM): software included as part of the printing system ("Printing Software"), the digitally-encoded machine-readable outline data en- coded in the special format and in the encrypted form ("Font Programs"), other software which runs on a computer system for use in conjunction with the Printing Software ("Host Software"), and related explanatory...
Page 36: I-Option Lk-105 V4 (Searchable Pdfs) End User License Agreement
1.12 i-Option LK-105 v4 (Searchable PDFs) End User License Agreement 1.12 i-Option LK-105 v4 (Searchable PDFs) End User License Agree- ment Subject to your purchase of a license key of i-Option LK-105 v4 (searchable PDFs, or "Program"), KONICA MINOLTA, INC. (KM) grants you a non-exclusive and non-transferable sublicense to use the Program provid- ed that you comply with all terms and conditions stated in this Agreement.
Page 37 i-Option LK-105 v4 (Searchable PDFs) End User License Agreement 1.12 1-28 bizhub C759/C659, AccurioPrint C759...
Page 38: About This Machine
About this machine...
Page 39: Intended Use Of Office Mfp Devices
Intended use of office MFP devices About this machine Intended use of office MFP devices Intended use This Multi Function Product incorporates the functionality of multiple office devices in one. It is designed to be used as an office system for the following purposes: Print, copy, scan and fax documents.
Page 40: Introduction To User's Guide
Introduction to user's guide Introduction to user's guide The user's guide of this product consists of the booklet manual and the User's Guide CD. The booklet manual describes basic machine procedures and frequently asked questions. If you want to learn about more detailed functions or operation methods, refer to the User's Guide included in the User's Guide CD.
Page 41: Layout Of Top Page
Introduction to user's guide Layout of top page Name Description [Search by Function] Searches for desired information based on functions such as printing or scanning, and based on buttons displayed on the Touch Panel. [Search] Enter one or multiple keywords to search within the User's Guide. If necessary, you can distinguish between upper and lower case alpha- bet characters to carry out a search.
Page 42: Target Groups
Introduction to user's guide For Macintosh Double-click the CD icon on the desktop, then [index.html] to display the model selection screen. Select your model in the displayed model selection screen to display the top page. 2.2.2 Target groups The user's guides (see page 2-3) are intended for the following users of the system: Target group Description User...
Page 43: Screens
Introduction to user's guide Symbols/Notations Description This symbol indicates reference functions related to a topic. This shows the settings related to a particular topic for any user. This shows the settings related to a topic only for administrators. This check mark symbol shows a precondition of a procedure.
Page 44: About This Machine
About this machine About this machine 2.3.1 Optional components Various optional components can be added to meet your office requirements. List of optional components Name Description Main unit Scans the original in the scanner section, and prints a scanned image in the printer section.
Page 45: List Of Other Optional Components
About this machine Name Description Keyboard Holder KH- Install this holder to use a external keyboard. For details on external keyboards, contact your service representa- tive. Fax Kit FK-516 Used to operate this machine as a fax machine. Alternatively, this kit allows more telephone lines to be connected.
Page 46 About this machine Name Description Spare TX Marker A replacement stamp for the Stamp Unit SP-501. Stamp 2 Local Interface Kit Install this unit when using the voice guidance function. EK-610 The speaker and USB port are added. Local Interface Kit Install this unit when using the voice guidance function or the connec- EK-611 tion function with a Bluetooth LE-compatible iOS terminal.
Page 47: Name Of Parts (Mfp)
About this machine 2.3.2 Name of parts (MFP) Front Name Description Control Panel Use the Touch Panel or buttons on this panel to operate this ma- chine. Original Tray Load the original. Stylus Pen Used to operate the Touch Panel. USB Port (Type A) Used to connect an external memory unit (USB memory unit) to this USB2.0/1.1...
Page 48: Side/Rear
About this machine Name Description Status Indicator Flashes white during printing. Warning Indicator Flashes orange if a warning occurs. Lights up orange if this machine has stopped due to an error. Side/rear The illustration shows the main unit that is equipped with the optional Fax Kit FK-516, FAX Kit FK-515, and Fax Mount Kit MK-742.
Page 49 About this machine Tips The network port of this product is following No.7 and No.10. A port is activated when a network port inserts a cable. Reference For details, refer to the User's Guide CD. 2-12 bizhub C759/C659, AccurioPrint C759...
Page 50: Name Of Parts (Optional Units)
About this machine 2.3.3 Name of parts (Optional units) This section shows the names of distinctive parts for each optional unit that can be installed in this machine. Finisher FS-537/Finisher FS-537 SD/Punch Kit PK-523/Z Folding Unit ZU-609 Name Output Tray Staple Cartridge Punch Kit Punch Scrap Box...
Page 51 About this machine Name Z Folding Unit Saddle Staple Cartridge 1 Saddle Staple Cartridge 2 Folding Output Tray Stopper 2-14 bizhub C759/C659, AccurioPrint C759...
Page 52: Job Separator Js-602
About this machine Job Separator JS-602 Name Output Tray bizhub C759/C659, AccurioPrint C759 2-15...
Page 53: Post Inserter Pi-507
About this machine Post Inserter PI-507 Name Lower Tray Upper Tray Post Inserter Control Panel Reference For details on how to use the Post Inserter Control Panel, refer to the User's Guide CD. 2-16 bizhub C759/C659, AccurioPrint C759...
Page 54 About this machine Finisher FS-536/Finisher FS-536 SD/Punch Kit PK-520 Name Output Tray Staple Cartridge Punch Scrap Box Saddle Stitcher bizhub C759/C659, AccurioPrint C759 2-17...
Page 55 About this machine Name Punch Kit Saddle Staple Cartridge 1 Saddle Staple Cartridge 2 Folding Output Tray 2-18 bizhub C759/C659, AccurioPrint C759...
Page 56 About this machine Large Capacity Unit LU-303/LU-205 bizhub C759/C659, AccurioPrint C759 2-19...
Page 57: Power Supply
Power supply Power supply This machine provides two power switches: Power key on the Control Panel and Main Power Switch on the machine. Under normal conditions, operate the Power key of the Control Panel. Use Main Power Switch to restart this machine. 2.4.1 Turning the power on and off Turn the power on and off only when necessary, for example, when the administrative settings are changed...
Page 58: Power Save Function
Power supply In the low power or sleep mode, you can return this machine from the power save mode to the normal mode simply by placing your hand close to the Control Panel. Status of this machine Description Power Save Low Power or Flashes blue.
Page 59 Power supply For information on the default administrator password, refer to page 5-52. After the setting is changed, the power save mode shifts as shown below depending on how the Power key is pressed. Pressing the Power key This machine shifts to the Sub Power OFF mode. In the Sub Power OFF mode, the machine can receive data or faxes, but cannot scan or print an original.
Page 60: Control Panel
Control Panel Control Panel The optional Keypad KP-101 is equipped on the right side of the Control Panel. 2.5.1 Name of parts Name Description Touch Panel Displays setting screens and messages. Directly press this panel to carry out operations. Mobile touch area Used to associate this machine with an NFC-compatible Android ter- minal.
Page 61 Control Panel Name Description 1 - 4 Press each key to switch the display of the Touch Panel to a function assigned to a Register key. • 1 ([Enlarge Display]): Enters Enlarge Display mode. • 2 ([Guidance]): Press this key to display the Help Menu. You can display descriptions of the functions and operating procedures on the screen.
Page 62: Touch Panel
Touch Panel Touch Panel 2.6.1 Main Menu Press the Menu key on the Control Panel to display the main menu. In the main menu, you can configure settings such as frequently used functions or a shortcut key for jumping to each mode. Layout of main menu Name Description...
Page 63: Customizing The Main Menu
Touch Panel Customizing the main menu The main menu can be extended to three screens as necessary. Up to 25 keys can be assigned to three main menu screens which can be switched. In addition, you can specify your favorite background pattern. If necessary, you can add a background pat- tern by registering an image on this machine.
Page 64: Operating The Touch Panel
Touch Panel 2.6.3 Operating the Touch Panel The Touch Panel of this machine supports user-friendly operations, such as, sliding a finger on the Touch Panel. Lightly touch the screen with your finger, then remove your finger from the screen immediately. This action is available when selecting or determining a menu.
Page 65: Drag
Touch Panel Drag To move the scroll bar or document, place your finger on it and move your finger. Used to move the scroll bar or document. Slide your finger parallel in a front-to-back and side-to-side direction on the screen. Used to move to the in- tended display location if data spans multiple screens.
Page 66: Drag & Drop
Touch Panel Drag & Drop Slide your finger to the intended place and release it while a document is selected. Used to move the docu- ment to the intended place. Pinch-in / Pinch-out Place two fingers on the screen and then open or close them. Used to enlarge or reduce a preview image. Rotation Place two fingers on the screen and then rotate them.
Page 67: Precautions For Using The Touch Panel
Touch Panel Precautions for using the Touch Panel This machine features a capacitance-base touch panel. Note the following points when operating the Touch Panel. Use your finger or the Stylus Pen supplied with this machine. Note that the Touch Panel will not re- spond appropriately if you operate it using your nail or a pen tip instead of your finger or the Stylus Pen.
Page 68: How To Move The Keypad
Touch Panel How to move the Keypad Move your finger while the upper side of Keypad is being pressed. How to close the Keypad After entering, tap [Close] to close the Keypad. It can also be closed by pressing the 10 Keypad key (default: Register key 3). To display the Keypad all the time The Keypad can always be displayed to enable entry of the number of copies on the copy screen, User Box print setting screen, or browser print setting screen.
Page 69: Entering Characters
Touch Panel 2.6.5 Entering characters When entering characters to register an address or program, use the keyboard screen displayed on the Touch Panel. When typing in "Group1": To type in uppercase letters or symbols, tap the [Shift] key. % If you mistyped, tap [ ] or [ ] to move the cursor to the character you want to clear, then tap the [Delete] key.
Page 70: Jobs
Jobs Jobs 2.7.1 Job screen A job refers to an individual operation unit such as printing, sending, receiving, or saving. When you tap [Job List] in the main menu or the main screen of each mode, the Job screen appears. In the Job screen, you can view a list or history of a job currently being executed or print a sending-receiving result report.
Page 71: Loading Paper
Loading Paper Loading Paper 2.8.1 Loading paper in Tray 1 to Tray 2 Up to 500 sheets of plain paper can be loaded into each tray. Applicable paper types Plain paper, single-side-only paper, thin paper, special paper, thick paper, letterhead, colored paper, and re- cycled paper Applicable paper sizes Type...
Page 72: Loading Paper In Tray 3 To Tray 4
Loading Paper Load paper into the tray with the print side facing up. Close the Tray. When you change the paper type or change to custom size paper, proceed to step 5 to change the setting on this machine. When you do not change the paper type or change to custom size paper when adding paper, you can use the current setting without making any changes.
Page 73: How To Load Paper
Loading Paper How to load paper Pull out the tray. NOTICE Be careful not to touch the surface of the Paper Feed Rollers with your hand. Load the paper with the required side facing upward. NOTICE Do not load the tray with paper of a size other than that previously specified. When changing the paper size, contact your service representative.
Page 74: Loading Paper Into The Large Capacity Unit
Loading Paper 2.8.3 Loading paper into the Large Capacity Unit Up to 3000 sheets of plain paper can be loaded into Large Capacity Unit LU-303, and up to 2500 sheets of plain paper into Large Capacity Unit LU-205. The Large Capacity Unit is an option. Applicable paper types Plain paper, single-side-only paper, thin paper, special paper, thick paper, letterhead, colored paper, recy- cled paper...
Page 75: Bypass Tray
Loading Paper Close the Upper Door. When you change the paper type, proceed to step 4 to change the setting on this machine. When you do not change the paper type when adding paper, you can use the current setting without making any changes.
Page 76: How To Load Paper
Loading Paper How to load paper Open the Bypass Tray. % To load large-sized paper, pull out the Tray Extension. % To load banner paper, install the optional Mount Kit MK-715. NOTICE Be careful not to touch the surface of the Paper Feed Rollers with your hand. Load paper with the print side facing down, then align the Lateral Guide to the paper.
Page 77: Loading Postcards
Loading Paper Loading postcards Up to 50 postcards can be loaded into the tray. Load postcards in the w direction as shown in the figure with the print side facing down, then align the Lateral Guide to the paper. % Insert postcards into the tray until their edges are pressed against the back. NOTICE When loading postcards into the Bypass Tray, note the following points.
Page 78: Loading Transparencies
Loading Paper Change the paper size setting. % In [Paper Size] - [Envelope/4 e 6] ([Envelope/A6 Card]), select [4 e 6] ([A6 Card]). Selecting [4 e 6] ([A6 Card]) sets [Paper Type] to [Thick3]. Loading transparencies Up to 20 transparencies can be loaded into the tray. Load transparencies in the v direction as shown in the figure with the print side facing down, then align the Lateral Guide to the paper.
Page 79: Loading Envelopes
Loading Paper Loading envelopes Up to 10 envelopes can be loaded into the tray. Image of a long envelope Image of a Western-style envelope Load envelopes as shown in the figure with the flap part facing up, then align the Lateral Guide to them. % Insert envelopes into the tray until their edges are pressed against the back.
Page 80 Loading Paper % Do not use envelopes that have glue or release paper on the flap or the part covered by the flap on the body. Otherwise, the machine may be damaged or a failure may occur. % Do not put spare envelopes in the Bypass Tray. Doing so causes a size detection error. The screen for selecting the paper type and paper size appears.
Page 81: Loading Label Sheets
Loading Paper Loading label sheets Up to 50 label sheets can be loaded into the tray. Load label sheets in the w direction as shown in the figure with the print side facing down, then align the Lateral Guide to the paper. % Insert label sheets into the tray until their edges are pressed against the back.
Page 82: Loading Index Papers
Loading Paper Loading index papers Up to 70 index papers can be loaded into the tray. Put the tab side in the direction opposite to this machine with the print side facing down, then align the Lateral Guide to the paper. % Insert index papers into the tray until their edges are pressed against the back.
Page 83 Loading Paper 2-46 bizhub C759/C659, AccurioPrint C759...
Page 84: Basic Settings And Operations
Basic Settings and Operations...
Page 85: Print Function
Print function Basic Settings and Operations Print function 3.1.1 Required settings and basic operations (for Windows OS) Print data created on your computer via the network. This section describes how to configure standard print settings using the installer. Preparation flow The following describes a preparation flow to print data.
Page 86: Checking The Cable Connection
Print function Checking the cable connection Check that a LAN cable is connected to the LAN port of this machine and the green LED is on. Checking network settings of this machine Tap [Utility], and select [Device Information]. Check that the IP address is displayed. Tips In general, the default settings are available for network connection;...
Page 87: Installing The Printer Driver
Print function Installing the printer driver Install the printer driver using the installer. Administrator privileges are required to perform this task. Insert the printer driver DVD into the DVD drive of the computer. Select [Agree the Software End User License Agreement.] and [Install printers/MFPs], and click [Next]. Select this machine from the list of detected printers.
Page 88: Printing Data
Print function Click [Next]. Click [Install]. Click [Finish]. Printing data Open the data you want to print using the application software. In the [File] menu, click [Print]. bizhub C759/C659, AccurioPrint C759...
Page 89: Types Of Printer Drivers
Print function Select the installed printer driver, and click [Print]. Tips Clicking [Preferences] can change the setting of the printer driver as required. If user authentication is enabled in this machine, specify the required data such as the user name and password.
Page 90: Required Settings And Basic Operations (For Mac Os)
Print function 3.1.2 Required settings and basic operations (for Mac OS) Print data created on your computer via the network. This section describes how to configure a printer driver, for Mac OS 10.9 environment, Bonjour connection, and use of metric-size paper as major conditions. Preparation flow The following describes a preparation flow to print data.
Page 91: Checking The Cable Connection
Print function Checking the cable connection Check that a LAN cable is connected to the LAN port of this machine and the green LED is on. Checking network settings of this machine Tap [Utility], and select [Device Information]. Check that the IP address is displayed. bizhub C759/C659, AccurioPrint C759...
Page 92 Print function Specify the Bonjour name. Tap [Utility], and select [Administrator Settings] - [Network Settings] - [Bon- jour Setting] - [ON]. % For information on the default administrator password, refer to page 5-52. % The Bonjour name is displayed on the printer driver as a connected device name. % To change the Bonjour name, tap [Bonjour Name], and enter the name using the displayed key- board.
Page 93: Installing The Printer Driver
Print function For information on the default administrator password, refer to page 5-52. Installing the printer driver Install the printer driver using the installer. Administrator privileges are required to perform this task. Insert the printer driver DVD into the DVD drive of the computer. Select the target printer driver, and copy it to the desktop.
Page 94 Print function Proceed with the procedure according to the on-screen instructions until the installation screen ap- pears. bizhub C759/C659, AccurioPrint C759 3-11...
Page 95: Adding And Configuring A Printer Driver
Print function Click [Install]. When a prompt message appears to ask you to enter the name and password, type in the name and password of the user with administrator privileges. Click [Close]. Adding and configuring a printer driver Set up your computer so that data can be printed using the installed printer driver. Administrator privileges are required to perform this task.
Page 96: Printing Data
Print function Select a printer from the displayed list of printers. % If you cannot identify the connected machine because the same product name is listed multiple times, check with the administrator. % If the target printer name is not displayed, select [Add Other Printer or Scanner] or [Add Printer or Scanner] to set up the printer.
Page 97 Print function Tips If necessary, you can click [Show Details] to change the settings of the printer driver. 3-14 bizhub C759/C659, AccurioPrint C759...
Page 98: Scan-To-Send Function
Scan-to-Send function Scan-to-Send function 3.2.1 Various transmission methods The original data scanned by this machine can be sent and saved using a variety of methods. Sending data to your computer (SMB Send) Send scanned data to a computer on the network. Once settings are configured, you can send data easily. For details, refer to page 3-16 and page 3-25.
Page 99: Various Methods For Transmitting And Saving Data
Scan-to-Send function Various methods for transmitting and saving data In addition to the above, data can be sent and saved in various methods. Select the appropriate one to meet your needs. Issuing a scan instruction from a computer (Web service function) Saving data to a User Box on the HDD (Save in User Box) Sending to an FTP server (FTP Send) Sending to a WebDAV server (WebDAV Send)
Page 100: Operation Flow
Scan-to-Send function Registering destinations % Register destinations to which files are sent while checking the checklist. For details, refer to page 3-21. Operation flow The following describes a transmission flow. For details, refer to page 3-23. Loading the original Selecting a destination % Select a registered destination, and check the settings such as the file type and image quality.
Page 101: Checklist
Scan-to-Send function For information on the default administrator password, refer to page 5-52. Checklist While making notes in the checklist shown below, check computer information and configure settings for preparation. The completed checklist is used for Store Address. Name Entry column Detail Host Address Host name or IP address to which the scanned data is sent...
Page 102: Configuring Your Computer
Scan-to-Send function Open the command prompt. % In Windows 8.1/10, while pressing the [Windows] ( ) key, press the [X] key, and then select [Com- mand Prompt] in the displayed menu. % In Windows 7, from the Start menu, select [All Programs] - [Accessories] - [Command Prompt]. Check the user name, and write it down in the User ID column of the checklist.
Page 103 Scan-to-Send function Click the [Sharing] tab, and also click [Advanced Sharing]. Select the [Share this folder] check box, then click [Permissions]. Select [Everyone] from the [Group or user names:] list, then select all of the [Allow] check boxes. 3-20 bizhub C759/C659, AccurioPrint C759...
Page 104: Registering Destinations
Scan-to-Send function Registering destinations While checking the created checklist, register the folder for receiving the scanned data as an address book of this machine. Tap [Utility], and select [One-Touch/User Box Registration] - [Create One-Touch Destination] - [Address Book] - [PC (SMB)]. Tap [New].
Page 105 Scan-to-Send function While checking the checklist, enter the user ID and password you wrote down. While checking the checklist, enter the host address and file path you wrote down. Tap [Close]. 3-22 bizhub C759/C659, AccurioPrint C759...
Page 106: Sending The Original
Scan-to-Send function Sending the original Load the original. Tap [Scan/Fax]. Select a destination. bizhub C759/C659, AccurioPrint C759 3-23...
Page 107 Scan-to-Send function Check the setting if necessary. % Tap [Check Setting] to check the setting. % You can also check the setting using the keys displayed on the Touch Panel. % To change the setting, tap the desired key on the Touch Panel. Settings Description [Simplex/Duplex]...
Page 108: Sending Data To Your Mac Computer (Smb Send)
Scan-to-Send function 3.2.3 Sending data to your Mac computer (SMB Send) Send scanned data to a computer on the network. Once settings are configured, you can send data easily. Preparation flow The following describes a preparation flow for sending scanned data. For details, refer to the relevant page. This preparation is not required the second time or subsequent times.
Page 109: Checking The Cable Connection
Scan-to-Send function Checking the cable connection Check that a LAN cable is connected to the LAN port of this machine and the green LED is on. Checking network settings of this machine Tap [Utility], and select [Device Information]. Check that the IP address is displayed. Tips If no IP address is displayed, you need to set up the network.
Page 110: Configuring This Machine
Scan-to-Send function Configuring this machine The following settings are required. Select [NTLM v1/v2] in [Utility] - [Administrator Settings] - [Network Settings] - [SMB Settings] - [Client Settings], then tap [OK]. Select [Utility] - [Administrator Settings] - [System Settings] - [Date/Time Settings] to specify the same date/time and time zone between this machine and your computer, then tap [OK].
Page 111: Checking Computer Information
Scan-to-Send function Checking computer information Check the host address and user ID. Administrator privileges are required to perform this task. Check the IP address and user name, and write it down in the Host Address and User ID columns of the checklist.
Page 112 Scan-to-Send function Select the [File Sharing] check box, then click [Options...]. Select the [Share files and folders using SMB] and user name check boxes, then click [Done]. Under [Shared Folders:], click [+]. Select a new folder, then click [Add]. bizhub C759/C659, AccurioPrint C759 3-29...
Page 113: Registering Destinations
Scan-to-Send function Click the new folder to check the access right. If the access right is changed to [Read & Write], the setting is completed. Registering destinations While checking the created checklist, register the folder for receiving the scanned data as an address book of this machine.
Page 114 Scan-to-Send function For [Name], specify the name to be displayed on the assigned key. % For [Sort Character], enter the same name as [Name]. % This sets the appropriate index for the name, which you entered into [Name], to [Index]. To change the setting, tap [Index].
Page 115: Sending The Original
Scan-to-Send function Tap [Close]. Sending the original Load the original. Tap [Scan/Fax]. 3-32 bizhub C759/C659, AccurioPrint C759...
Page 116 Scan-to-Send function Select a destination. Check the setting if necessary. % Tap [Check Setting] to check the setting. % You can also check the setting using the keys displayed on the Touch Panel. % To change the setting, tap the desired key on the Touch Panel. Settings Description [Simplex/Duplex]...
Page 117: Transmit The Scanned Data Via E-Mail (E-Mail Tx)
Scan-to-Send function Press the Start key. 3.2.4 Transmit the scanned data via E-mail (E-mail TX) Send scanned data as an E-mail attachment. This function allows you to receive data at an outside location, which is useful when a quick measure is re- quired.
Page 118: Checking The Cable Connection
Scan-to-Send function Checking the cable connection Check that a LAN cable is connected to the LAN port of this machine and the green LED is on. Checking network settings of this machine Tap [Utility], and select [Device Information]. Check that the IP address is displayed. Tips In general, the default settings are available for network connection;...
Page 119: Configuring The E-Mail Transmission Environment
Scan-to-Send function Configuring the E-mail transmission environment Tap [Utility], and select [Administrator Settings] - [Network Settings] - [E-Mail Settings]. % For information on the default administrator password, refer to page 5-52. Tap [E-Mail TX (SMTP)]. Select [ON] to enable E-mail TX (SMTP) settings and E-mail TX function. 3-36 bizhub C759/C659, AccurioPrint C759...
Page 120: Configuring Administrator Information
Scan-to-Send function Enter the SMTP server address. Configuring administrator information Tap [Utility], and select [Administrator Settings] - [Administrator/Machine Settings] - [Administrator Reg- istration]. Enter the required information, then tap [OK]. bizhub C759/C659, AccurioPrint C759 3-37...
Page 121: Sending The Original
Scan-to-Send function Sending the original Load the original. Tap [Scan/Fax]. 3-38 bizhub C759/C659, AccurioPrint C759...
Page 122 Scan-to-Send function Enter a destination. Check the setting if necessary. % Tap [Check Setting] to check the setting. % You can also check the setting using the keys displayed on the Touch Panel. % To change the setting, tap the desired key on the Touch Panel. bizhub C759/C659, AccurioPrint C759 3-39...
Page 123 Scan-to-Send function Settings Description [Simplex/Duplex] Select whether to scan one or both sides of the original. [Resolution] Specify the scanning resolution. [Color] Select whether to scan the original in color or black and white mode. [File Type] Select the type of the file to save scanned data. [Scan Size] Specify the size of the original to be scanned.
Page 124: Fax Function
Fax function Fax function 3.3.1 Required settings and basic operations This section describes the settings required to send and receive a fax via a telephone line as well as the basic operations. Tips To use the Fax function, the optional Fax Kit is required. Preparation flow The following describes a preparation flow to send a fax.
Page 125: Checking The Cable Connection
Fax function Checking the cable connection Check that a modular cable is connected to the LINE port of this machine. Registering transmission information Tap [Utility], and select [Administrator Settings] - [Fax Settings] - [Header Information]. % For information on the default administrator password, refer to page 5-52. 3-42 bizhub C759/C659, AccurioPrint C759...
Page 126 Fax function Enter the sender information, then tap [OK]. % Sender settings Enter the name to be displayed as a sender. % Sender Fax No. Settings Enter the fax number to be displayed as a sender. bizhub C759/C659, AccurioPrint C759 3-43...
Page 127: Selecting The Dialing Method
Fax function Selecting the dialing method Tap [Utility], and select [Administrator Settings] - [Fax Settings] - [Line Parameter Setting]. Tap [Dialing Method]. For the push-button type, select [PB], and for the dial-pulse type, select [10pps]. If you do not know the type of the dialing method: If you do not know the type of the dialing method, operate push buttons of your phone.
Page 128: Sending The Original
Fax function Sending the original Load the original. Tap [Scan/Fax]. bizhub C759/C659, AccurioPrint C759 3-45...
Page 129 Fax function Enter a destination. Check the setting if necessary. % Tap [Check Setting] to check the setting. % You can also check the setting using the keys displayed on the Touch Panel. % To change the setting, tap the desired key on the Touch Panel. [Color], [File Type], and [File Name/Subject Name/Other] are not available when sending to a fax num- ber.
Page 130: Sending A Fax Directly From A Pc (Pc-Fax Tx)
Fax function Settings Description [Simplex/Duplex] Select whether to scan one or both sides of the original. [Resolution] Specify the scanning resolution. [Scan Size] Specify the size of the original to be scanned. [Separate Scan] If all pages of the original cannot be loaded into the ADF at one time, change the setting to ON.
Page 131: Preparation Flow
Fax function Preparation flow The following describes a preparation flow to send a fax from a computer. For details, refer to the relevant page. This preparation is not required the second time or subsequent times. Checking the cable connection (Administrator) % Check that this machine is correctly connected to the telephone line and network cable.
Page 132: Checking Network Settings Of This Machine
Fax function Check that a LAN cable is connected to the LAN port of this machine and the green LED is on. Checking network settings of this machine Tap [Utility], and select [Device Information]. Check that the IP address is displayed. Tips In general, the default settings are available for network connection;...
Page 133: Installing The Fax Driver
Fax function Installing the fax driver Install the fax driver on the PC by using the installer. This section describes how to configure the standard print settings. Administrator privileges are required to perform this task. Insert the fax driver DVD into the DVD drive of the computer. Select [Agree the Software End User License Agreement.] and [Install printers/MFPs], and click [Next].
Page 134 Fax function Select [Specify manually.], and check [FAX] is selected. Click [Next]. Click [Install]. bizhub C759/C659, AccurioPrint C759 3-51...
Page 135: Sending Data
Fax function Click [Finish]. Sending data Create data to be sent using application software. From the [File] menu, select [Print]. Select the fax driver of this machine, and click [Print]. % Clicking [Preferences] can change the setting of the printer driver as required. % If user authentication is enabled in this machine, specify the required data such as the user name and password.
Page 136 Fax function Enter the destination [Name] and [FAX Number]. % To send data to more than one destination, repeat this step. % Clicking [Add from Address Book] can retrieve the registered destinations of this machine. Click [OK]. bizhub C759/C659, AccurioPrint C759 3-53...
Page 137: Copy Function
Copy function Copy function Basic operations The following describes the basic operations to make a copy. If user authentication is enabled, the login screen appears. Tap the entry area or keyboard icon to enter the required information, then tap [Login] or press the Access key. % If IC card or biometric authentication is enabled, refer to page 3-56.
Page 138 Copy function Check the basic settings. % Check the output image configured as specified while viewing the output illustrations displayed on the Touch Panel. % Tapping [Check Setting] can check detailed settings. % To change the setting, tap the desired key on the Touch Panel. Settings Description [Original Type]...
Page 139: User Authentication
Copy function Enter the number of copies using the Keypad, and press the Start key. User authentication You can perform authentication by user or group in this machine. Installing optional units enables IC card, NFC, or biometric authentication. If IC card or NFC authentication is enabled, place the IC card or Android terminal on the card reader of the authentication unit.
Page 140: Registering A Destination
Registering a destination Registering a destination 3.5.1 Registering an address book The fax and scan-to-send functions can register the frequently used destinations as address books. This sec- tion explains an example to register an address book to which a fax is sent. Using the Control Panel to register an address book - Registration from [Utility] Select a destination type, and register destination information.
Page 141 Registering a destination Enter the destination name you want to register. % For [Name], enter the destination name using the displayed keyboard. % For [Sort Character], enter the same name as [Name]. % This sets the appropriate index for the name, which you entered into [Name], to [Index]. To change the setting, tap [Index].
Page 142: Using The Control Panel To Register An Address Book - Registration From [Address Book]
Registering a destination Using the Control Panel to register an address book - Registration from [Address book] Select a destination type, and register destination information. Tap [Address book]. Tap [New]. Select the type of the destination you want to register. bizhub C759/C659, AccurioPrint C759 3-59...
Page 143: Using The Control Panel To Register An Address Book - Registration In Scan/Fax Mode
Registering a destination Enter the destination name you want to register. % For [Name], enter the destination name using the displayed keyboard. % For [Sort Character], enter the same name as [Name]. % This sets the appropriate index for the name, which you entered into [Name], to [Index]. To change the setting, tap the [Index] field.
Page 144 Registering a destination Tap [Address Reg.]. Tap [New]. Select the type of the destination you want to register. bizhub C759/C659, AccurioPrint C759 3-61...
Page 145 Registering a destination Enter the destination name you want to register. % For [Name], enter the destination name using the displayed keyboard. % For [Sort Character], enter the same name as [Name]. % This sets the appropriate index for the name, which you entered into [Name], to [Index]. To change the setting, tap the [Index] field.
Page 146 Registering a destination Registration by Direct Input The destination entered by using the [Direct Input] button can be registered before sending data as well. To register the destination, tap [Address Reg.] after entering the destination using direct input, and then select the destination.
Page 147: Using A Computer To Register A One-Touch Destination
Registering a destination Using a computer to register a one-touch destination In addition to using the Control Panel, address books can be registered from a computer using the utility software, Web Connection. Check the IP address of this machine % Tap [Utility], and select [Device Information]. Check that the IP address is displayed. % If no IP address is displayed, you need to configure the network.
Page 148: Information Required To Register A Destination
Registering a destination Select the type of the destination you want to register, and enter the required information such as the name, fax number, and index. 3.5.2 Information required to register a destination The items to be entered or the number of screens required to register a destination vary depending on the transmission type.
Page 149: Registering A Group
Registering a destination Item Description [FTP] [Name] Enter the name of the destination to be registered as an address book. [Host Address] Enter the address of the FTP server. [File Path] Enter the directory to be used as the destination. [User ID] Enter the user ID required to log in with FTP.
Page 150 Registering a destination Enter the destination name you want to register. % For [Name], enter the destination name using the displayed keyboard. % For [Sort Character], enter the same name as [Name]. % This sets the appropriate index for the name, which you entered into [Name], to [Index]. To change the setting, tap [Index].
Page 151 Registering a destination Select destinations to be grouped. Display and select the target address book on the destination selection screen. The following two meth- ods can be used to search for a destination. % [Index]: Searches for the target destination name using an index. % [Registration Number]: Searches for the target destination using a registration number.
Page 152: Retrieving A Registered Destination
Registering a destination 3.5.4 Retrieving a registered destination Retrieve an address book or group to specify it as a destination to which data is sent. Retrieving a destination Tap [Scan/Fax]. The destinations, which are categorized into [Favorite] when registering indexes, are displayed on the basic screen.
Page 153: Specifying A Destination
Registering a destination Narrow down destinations using index and address type. Specifying a destination In addition to retrieving a registered destination, a destination can be specified in various methods. Method Description [Direct Input] Directly enter a destination using the keyboard screen or Keypad. [Job History] Specify a target destination in the job history (latest five destinations) on the scan/fax screen.
Page 154: Using A Usb Memory Device
Using a USB memory device Using a USB memory device 3.6.1 Printing data in a USB memory device Data saved in the USB memory device can be printed. This function is useful when printing data created on a computer that is not connected to the network. Available USB memory device Compatible with USB Version 2.0/1.1 interface Formatted in FAT32...
Page 155 Using a USB memory device Select data to be printed, and tap [Print]. Check print settings. Press the Start key. NOTICE Do not disconnect the USB memory device during data printing. 3-72 bizhub C759/C659, AccurioPrint C759...
Page 156: Saving The Scanned Data In The Usb Memory Device (External Memory)
Using a USB memory device 3.6.2 Saving the scanned data in the USB memory device (External memory) The data scanned on this machine can be saved to the USB memory device, so it is convenient when printing data created on a computer that is not connected to the network. Available USB memory device Compatible with USB Version 2.0/1.1 interface Formatted in FAT32...
Page 157: Saving Data In The Usb Memory Device
Using a USB memory device Select [Save Document] and [ON]. Tap [OK]. Saving data in the USB memory device Load the original. Connect a USB memory device to this machine. NOTICE Use the USB connector on the side that is near the Control Panel. Do not use a USB device other than a flash-memory device.
Page 158 Using a USB memory device Tap [Save a document to External Memory.]. Check the file name. If necessary, check the setting to save data. % Tap [Check Setting] to check the setting. % To change a file name, tap the file name or keyboard icon. % You can also check the setting using the keys displayed on the Touch Panel.
Page 159 Using a USB memory device Settings Description [Simplex/Duplex] Select whether to scan one or both sides of the original. [Resolution] Specify the scanning resolution. [Color] Select whether to scan the original in color or black and white mode. [File Type] Select the type of the file to save scanned data.
Page 160: Using The Guidance Function
Using the guidance function Using the guidance function 3.7.1 Guidance screen This machine provides the guidance function to display the description of a function on the screen and view an operation procedure with moving images. If you have any questions during operation, try to use this guidance function. Getting help on the currently displayed screen: Select [Function] on the Help Menu to display the guidance screen.
Page 161 Using the guidance function Narrow down the information you want to know. Name Description [Exit] Returns to the screen that is displayed before the guidance screen. [To Menu] Returns to the Help Menu. 3-78 bizhub C759/C659, AccurioPrint C759...
Page 162: Getting Help On The Desired Function Or Procedure
Using the guidance function Name Description [Close] Returns to the preceding screen. Getting help on the desired function or procedure: Open the Help Menu, and select a menu depending on an objective to display the guidance screen. Press the Guidance key (default: Register key 2). Select a menu.
Page 163 Using the guidance function Narrow down the information you want to know. 3-80 bizhub C759/C659, AccurioPrint C759...
Page 164: Help Menu List
Using the guidance function Tapping [Go to function] opens the setting screen of a target function, enabling you to configure the settings immediately. Help Menu list The Help Menu provides the following information: Name Description [Function] Tap this button to display the guidance menu that has been sorted ac- cording to the function names to be displayed in the screen.
Page 165: Using The [Quick Security] Function
Using the [Quick Security] function Using the [Quick Security] function 3.8.1 [Quick Security] [Quick Security] allows you to configure the settings for enhancing the security level of this machine. In order to use this machine securely, we recommend that you use the [Quick Security] function to configure the set- tings.
Page 166 Using the [Quick Security] function Configure a setting for each option. Settings Description [Administrator Password] Change the administrator password of this machine. [USB Enable Settings] Specify whether to permit a function that requires the USB Port. [Password Rules] Configure whether to enable the password rules. Once you enable it, the number of characters and text types that are available for passwords is restricted.
Page 167 Using the [Quick Security] function 3-84 bizhub C759/C659, AccurioPrint C759...
Page 168: Advanced Functions
Advanced Functions...
Page 169: Using Advanced Functions
Using advanced functions Advanced Functions Using advanced functions 4.1.1 What are advanced functions? Various functions for further enhancement of the MFP operability are expressed as advanced functions in this manual. This machine provides the following advanced functions. Tips To use an advanced function, you need to register i-Option or associate with the My Panel Manager application.
Page 170: Association With Application
Using advanced functions In addition, this machine supports advanced functions such as the barcode font, unicode font, and OCR font. Reference For details, refer to the User's Guide CD. 4.1.2 Association with application To use the My Panel or My Address function, you need to purchase My Panel Manager and enable the target function in the application side.
Page 171 Using advanced functions Tap [Utility], and select [Administrator Settings] - [Forward] - [License Settings] - [Install License] - [To- ken Code]. % For information on the default administrator password, refer to page 5-52. Enter the token number shown in the token certificate. Select [Yes], then tap [OK].
Page 172: Registering The I-Option License
Using advanced functions Registering the i-Option license Register the request code and the contents of the token certificate on the Web site of the License Manage- ment Server (LMS). This procedure is available when this machine cannot be connected to the Internet. Tap [Utility], and select [Administrator Settings] - [Forward] - [License Settings] - [Get Request Code].
Page 173 Using advanced functions Enter the [Token Number], select the option you want to register from the [Product Description] list, then click [Next]. Confirm the registration contents, then click [Generate License Code]. The license code and function code are issued. Tips The issued license code and function code are required to enable i-Option.
Page 174: Enabling The I-Option Function Using The License (Administrator)
Using advanced functions Enabling the i-Option function using the license (Administrator) Register the license and function codes in this machine. This procedure is available when this machine cannot be connected to the Internet. By inputting the codes Tap [Utility], and select [Administrator Settings] - [Forward] - [License Settings] - [Install License] - [Function/Licence Code].
Page 175: Configuring Each Function
Using advanced functions By using a USB memory device Connect the USB memory device stored with the license code. Tap [Utility], and select [Administrator Settings] - [Forward] - [License Settings] - [Install License from Ext. Memory]. Select [Yes], then tap [OK]. This machine restarts automatically.
Page 176: Using The Web Browser Function
Using the Web browser function Using the Web browser function 4.2.1 Required settings and procedures The Web browser can be used on the Touch Panel of this machine. This section describes how to display and print a Web page on the Touch Panel of this machine. Tips Check that this machine can be connected to the Internet.
Page 177: Enabling The Web Browser Function
Using the Web browser function Reference For details, refer to the User's Guide CD. Enabling the Web browser function Tap [Utility], and select [Administrator Settings] - [Network Settings] - [Forward] (twice) - [Web Browser Settings] - [Web Browser Usage Settings]. % For information on the default administrator password, refer to page 5-52.
Page 178: Registering The License
Using the Web browser function Registering the license Register the serial number of this machine on the Web site of the License Management Server (LMS). This procedure is available when this machine cannot be connected to the Internet. Display the serial number of this machine. Tap [Utility], and select [Device Information]. Write down the serial number of this machine.
Page 179: Enabling The Web Browser Using The License
Using the Web browser function The license code is issued. Tips The issued license code is required to enable Web browser function. You should write them down on a memo pad or print them out on paper by clicking [Print]. You could also store them in your USB memory device.
Page 180 Using the Web browser function Select [ON], then tap [OK]. When the screen shown below appears, tap [Function/License Code]. Enter the license code you wrote down. bizhub C759/C659, AccurioPrint C759 4-13...
Page 181 Using the Web browser function Select [Yes], then tap [OK]. This machine restarts automatically. By using a USB memory device Tap [Utility], and select [Administrator Settings] - [Network Settings] - [Forward] (twice) - [Web Browser Settings] - [Web Browser Usage Settings]. Select [ON], then tap [OK].
Page 182 Using the Web browser function Wait a few moments until the screen shown below appears. Connect the USB memory device stored with the license code. Select [Install License from Ext. Memory]. bizhub C759/C659, AccurioPrint C759 4-15...
Page 183: Starting The Web Browser
Using the Web browser function Select [Yes], then tap [OK]. This machine restarts automatically. Starting the Web browser Tap [Web Browser]. The Web browser starts. Tips The pre-specified home page appears. 4-16 bizhub C759/C659, AccurioPrint C759...
Page 184: Displaying Web Pages
Using the Web browser function Displaying Web pages Tap the URL display area. Enter the URL of a desired page, then tap [OK]. The target page appears. Tips Selecting [Menu] - [Display] allows you to zoom in and out from a page or change the character code. Selecting [Menu] - [Tab] allows you to open a new tab and display a different page.
Page 185: Printing The Currently Displayed Page Or The Linked File
Using the Web browser function Printing the currently displayed page or the linked file For the currently displayed page Tap [Print]. Specify the output paper. % To change the setting, tap the desired key on the Touch Panel. Settings Description [Color] Select whether to print in color or black and white mode.
Page 186 Using the Web browser function For the linked file This machine provides a capability that prints a PDF file, XPS file, OOXML file, PPML file, or TIFF file. Select a link to the printed file. Tap [Print]. % When linking to a PDF file, you can tap [View] to check its contents before printing the file. Specify the output paper.
Page 187 Using the Web browser function Press the Start key. 4-20 bizhub C759/C659, AccurioPrint C759...
Page 188: Using The Voice Guidance
Using the voice guidance Using the voice guidance 4.3.1 Required settings and procedures Using the voice guidance, you can confirm explanations of screens, keys, and key-related operations by voice. The voice guidance is available on the Enlarge Display screen, Guidance screen, and Accessibility Settings screen, and useful to assist operations or prevent this machine from operating incorrectly.
Page 189: Enabling The Voice Guidance Function
Using the voice guidance Enabling the voice guidance function Tap [Utility], and select [Administrator Settings] - [Forward] - [Voice Guidance Settings]. % For information on the default administrator password, refer to page 5-52. Assigning the voice guidance function to a Register key or to the slide menu Assign the voice guidance function to any Register key or to the slide menu.
Page 190: Specifying The Volume And Speed
Using the voice guidance Select [Voice Guide], then tap [OK]. Specifying the volume and speed Specify the volume or speed to read out. Tap [Accessibility], and select [ ] - [Voice Guidance Settings]. bizhub C759/C659, AccurioPrint C759 4-23...
Page 191: Operating The Voice Guidance
Using the voice guidance Specify the volume or speed. % [Volume]: Use [Higher] or [Lower] to adjust the volume. % [Voice Speed]: Select the speed to read out. Operating the voice guidance Press the Register key assigned with the voice guidance on the screen that supports the voice guid- ance.
Page 192: Keypad Operations For Voice Guidance
Using the voice guidance You will hear a voice to announce the start of the voice guidance, and the blue-frame voice cursor will be displayed. Tap the key for which a voice guidance is required. Press the Register key assigned with the voice guidance to exit the voice guidance function. Keypad operations for voice guidance Press the Voice Guide key on the screen that supports the voice guidance.
Page 193 Using the voice guidance Use the Keypad to operate the voice guidance. % Position the voice cursor at the key you want to hear the guidance for. % Determine the position of the voice cursor. % Reading out starts. Press the Voice Guide key to end the voice guidance. For the voice guidance, use the Keypad to perform various operations.
Page 194: Voice Guidance On The Scan/Fax Screen
Using the voice guidance Description Stops the currently replayed voice guidance. Moves the voice cursor to the previous. Determines the position of the voice cursor. Moves the voice cursor to the next. Reads out the setting items configured by the currently displayed function. (Available only in copy or scan/fax mode on the Enlarge Display screen) Reads out the previously read-out information again.
Page 195 Using the voice guidance 4-28 bizhub C759/C659, AccurioPrint C759...
Page 196: Frequently Asked Questions
Frequently Asked Questions...
Page 197: Print
Print Frequently Asked Questions Print 5.1.1 Q1. Can I print data on an envelope or postcard? A1. Yes, you can also print on envelopes and postcards. Execute a print job on your computer then load envelopes or postcards into this machine to execute a print job on it.
Page 198 Print Select [Bypass Tray] from [Paper Tray]. Click [OK]. Execute printing. The following screen appears on the Control Panel of this machine. bizhub C759/C659, AccurioPrint C759...
Page 199 Print Load envelopes or postcards into the Bypass Tray with the print side facing down. % Insert envelopes or postcards into the tray until their edges are pressed against the back. NOTICE When loading envelopes or postcards into the Bypass Tray, note the following points. % When loading envelopes, remove air from them, and securely press along the flap fold line.
Page 200 Print Slide the Lateral Guide to fit the size of the loaded paper. NOTICE When using the Bypass Tray, note the following points. % Do not put spare envelopes in the Bypass Tray. Doing so causes a size detection error. bizhub C759/C659, AccurioPrint C759...
Page 201: Q2. Can I Print On Custom Size Paper
Print % Do not put spare postcards in the Bypass Tray. Doing so causes a size detection error. Tapping [Complete] starts printing. % If you cannot tap [Complete], check whether the paper setting of the printer driver matches that of the main unit.
Page 202 Print In [Original Size] on the [Basic] tab, select [Custom Size]. Enter the size of the paper you have loaded, then click [OK]. Check that [Paper Size] is set to [Same as Original Size]. Select [Bypass Tray] from [Paper Tray]. bizhub C759/C659, AccurioPrint C759...
Page 203: Q3. Can I Directly Print A File In A Usb Memory Device
Print Select the relevant paper type from [Paper Type]. Click [OK]. Execute printing. Load custom size paper into the Bypass Tray with the print side facing down. % For details on how to load paper into the Bypass Tray, refer to page 2-38. % For details on how to load paper into Tray1 or Tray2, refer to page 2-34.
Page 204 Print Tap [Print a document from External Memory]. Select a file to print, then tap [Print]. % Select a folder, then tap [Open] to list documents and folders in the folder. Tap [Top] to return to the location one layer above. Change the print settings as necessary, and press the Start key on the Control Panel.
Page 205: Q4. Can Printing Be Restricted By User
Print 5.1.4 Q4. Can printing be restricted by user? A4. Yes. You can set user authentication to restrict printing by user. That enables output control by user, lead- ing to cost reductions. How to set Tap [Utility], then select [Administrator Settings]. Enter the password, then tap [OK].
Page 206 Print Enter the user name and password in [User Name] and [Password]. % If you have selected a registered user in Step 8, no information has to be entered. Tap [Max. Allowance Set] and [Color] or [Black], then enter the maximum allowance for the number of color/black originals that the user can print, using the Keypad.
Page 207: Q5. What Types Are Available For Printing Finish
Print Tap [Function Permission/Authority] - [Function Permission] to set the limit for the respective functions. Settings Description [Copy] Specify whether to allow a copy job. [Scan] Specify whether to allow a scan job. [Fax] Specify whether to allow a fax job. [Print] Specify whether to allow a print job for a file.
Page 208: Punch
Print Tips To use the Staple function, the optional Finisher is required. Punch Punching is enabled for filing holes. Tips To use the Punch function, the optional Finisher and Punch Kit are required. Center Staple Center stapling is enabled for booklet-like finish. Tips To use the Center Staple function, the optional Finisher FS-537 SD or the optional Finisher FS-536 SD is required.
Page 209: Q6. Can I Print On Very Long Sheets Of Paper Such As A Banner
Print Select this product from [Select Printer] (or [Printer Name]) then click [Preferences] (or [Properties]). Select the check box for the desired finish on the [Finish] tab. If you have selected the [Staple], [Punch] or [Fold] check box, specify the quantity, positions and other necessary settings. % The number of punched holes varies depending on the area you are in.
Page 210 Print Check that the screen waiting for banner printing job has appeared. % If a print job is received with a paper setting of a non-banner size while the machine is waiting to print on a banner, that job is queued. Open the file in the application, and click [File].
Page 211 Print Load paper for banner printing with the print side face down then tap [Complete]. Printing on the banner paper starts. Support the ejected banner paper by hand. % To continue banner printing, execute printing from the computer. Tap [Exit]. Tap [Yes].
Page 212: Scan
Scan Scan 5.2.1 Q1. Can frequently used destinations be registered? A1. Yes. You can register frequently used destinations in the address book. For details, refer to page 3-57. You can also put a number of one-touch destinations in one group and register them as a group. For details, refer to page 3-66.
Page 213: Fax
5.3.1 Q1. Can I check fax transmission and reception logs? A1. Yes. You can print out transmission and reception logs as a report. Reports can be prepared for scan and send logs, fax communications (transmission and reception logs), fax transmission logs and fax reception logs. Operation procedure Tap [Job List].
Page 214: Operation Procedure: Directly Entering Multiple Destinations
Tap [Scan/Fax] and select a destination. % You can select more than one one-touch destination from the address book. Tap [No. of Addr.] to display the broadcast destination list and check or delete the specified destinations. % To cancel the destination setting, tap the Address Book key for the destination to be canceled. % Select an index to narrow down destinations to display.
Page 215: Q3. Can I Register Multiple Sender Names Displayed On The Fax To Use Them Depending On Purposes
Enter a destination, then tap [OK]. % Tap [Next Dest.] on the address input screen to continue address entry (not enabled for a User Box). Repeat Steps 2 and 3 to complete entry of all destinations. [No. of Addr.] displays the number of entered destinations. % Tap [Check Setting] to check detailed information on the destinations you have entered or to cancel destinations.
Page 216: How To Set: Selecting A Sender Name Upon Fax Transmission
Select a number, then select [New]. Enter the sender name, then tap [OK]. Repeat Steps 4 and 5 to complete entry of all sender names. % You can register up to 20 sender names. % To edit a registered sender name, select a sender name and tap [Edit], change the sender name and tap [OK].
Page 217: Q4. Can I Avoid Expensive Communication Charges Using The Network
5.3.4 Q4. Can I avoid expensive communication charges using the network? A4. Yes. Use the Internet Fax function to send an E-mail message with an attachment containing the scanned data merely at expenses for online communications via the Internet. Within your intranet, the IP Address Fax function can be used. For IP Address Fax, specify either the IP ad- dress, host name or E-mail address of the destination fax machine to directly send a fax to that destination.
Page 218: Operation Procedure: Sending An Ip Address Fax
Enter the E-mail address of the destination in [Address] and select a compression format, paper size and resolution supported by the recipient machine from [Receiver RX Ability]. Tap [OK]. Press the Start key to start Internet fax transmission. Operation procedure: Sending an IP address fax Load the original.
Page 219: Q5. How Can I Avoid Printing Out Unwanted Faxes
5.3.5 Q5. How can I avoid printing out unwanted faxes? A5. Save received faxes in a User Box without printing them out then print out only the faxes you need. Operation procedure: Configuring to save received faxes in a User Box Tap [Utility], then select [Administrator Settings].
Page 220: Q6. Can I Forward An Incoming Fax
From [System], select [Memory RX]. Enter the password, then tap [OK]. Select a file then tap [Print]. % You can also long-tap the target file to display the menu icon, then drag and drop it to to get the same result. Check the message, then tap [Yes].
Page 221: Q7. Can I Directly Fax A File On My Computer Without Leaving My Desk
Select [Fax Settings] - [Function Settings] - [Forward TX Setting]. Tap [Fax]. Select [Yes] and configure the respective items for forwarding faxes. Settings Description [Output Method] To have forwarded faxes printed out on this machine, select [For- ward & Print]. To have faxes printed out on this machine only in the case forwarding has failed, select [Forward &...
Page 222: Operation Procedure
Operation procedure Open the file in the application, and click [File]. Then click [Print] from the menu. Select a fax driver from [Select Printer] (or [Printer Name]) then click [Print] (or [OK]). Enter the name and the fax number of the destination, then click [Add Recipients]. % You can also specify the destination by clicking [Add from Address Book] and selecting one from registered one-touch destinations.
Page 223: Copy
Copy Copy 5.4.1 Q1. Can I copy on an envelope or postcard? A1. Yes, you can also copy on an envelope and postcard. Load envelopes or postcards into the Bypass Tray, then specify the paper type and paper size of the Bypass Tray.
Page 224 Copy Slide the Lateral Guide to fit the size of the loaded paper. NOTICE When using the Bypass Tray, note the following points. % Do not put spare envelopes in the Bypass Tray. Doing so causes a size detection error. The screen for selecting the paper type and paper size appears.
Page 225: Operation Procedure: Copying On Postcards
Copy Select the envelope size from [Envelope/4 e 6] ([Envelope/A6 Card]). % Various sizes of envelopes are available. Specify the correct paper size for the envelopes you have loaded. When the envelope size is specified, the paper type is automatically set to [Envelope]. NOTICE When loading envelopes with flaps opened, also select the standard size that matches them.
Page 226 Copy Slide the Lateral Guide to fit the size of the loaded paper. NOTICE When using the Bypass Tray, note the following points. % Do not put spare postcards in the Bypass Tray. Doing so causes a size detection error. The screen for selecting the paper type and paper size appears.
Page 227: Q2. Can I Copy On Custom Size Paper
Copy Select [4 e 6] ([A6 Card]) from [Envelope/4 e 6] ([Envelope/A6 Card]). % When [4 e 6] ([A6 Card]) is specified for the paper size, the paper type is automatically set to [Thick3]. Tap [Close]. Press the Start key to start copying of the original on postcards. 5.4.2 Q2.
Page 228 Copy In [Custom Size Settings], specify the paper size by entering values for the lengths along [X] and [Y], then tap [Close]. % To specify a size registered in the memory, select the desired size from [Registered Paper Sizes], then tap [Recall]. Press the Start key to start copying of the original.
Page 229: Operation Procedure: Recalling The Custom Size Registered In Memory
Copy Load a single sheet to be measured on the ADF or Original Glass. NOTICE If a sheet is loaded on the Original Glass, leave the Original Cover open. If the weight of thick paper exceeds the paper weight that can be loaded into the ADF, an ADF failure may occur.
Page 230: Q3. Can I Check The Finish Before Starting Copying
Copy Tap [Custom Size]. Select the paper size to recall from [Registered Paper Sizes], then tap [Recall]. 5.4.3 Q3. Can I check the finish before starting copying? A3. Yes, you can check the finish by outputting a proof copy. You check either by referring to a preview image or by outputting just one copy for checking how it is actually finished.
Page 231: How To Set: Checking The Finish By Outputting One Copy
Copy Tap [Preview on Screen], select the original loading direction, then tap [Start]. Check the preview display, and rotate the page or change settings as required. % To continue scanning originals, load the original, then tap [Start Scan]. % To start copying, tap [Print] or press the Start key. % To enlarge the preview image, double-tap the image.
Page 232: Q4. Can I Easily Copy Various Cards Such As An Insurance Card Or Driver License Card
Copy Tap [Print], select the original loading direction, then tap [Start]. One copy is output. Check the finishing of the copy. If the finishing is acceptable, press the Start key. 5.4.4 Q4. Can I easily copy various cards such as an insurance card or driver li- cense card? A4.
Page 233 Copy Tap [Paper], select a paper tray to load paper into in order to copy a card, then tap [Close]. % If you specify [Card Shot], you must specify a paper tray other than [Auto]. Tap [Application], then select [Card Shot]. Tap [ON], then configure each item so that it corresponds with the finishing image.
Page 234 Copy After both sides of the card have been scanned, tap [Finish]. Press the Start key to start to copy the scanned card. bizhub C759/C659, AccurioPrint C759 5-39...
Page 235: User Box
User Box User Box 5.5.1 Q1. Can I create a User Box, or print or download a file in a User Box from my computer? A1. Yes. Use Web Connection or the Windows file sharing function to create a User Box or manage files in a User Box without leaving your desk.
Page 236 User Box Open the shared folder of this machine to search for the target file. % The shared folder of this machine is named in the format, "(9-digit User Box No.)_(User Box name)". % If the ID and password are required to open the shared folder, enter the following information. ID: User Box number Password: Password specified for the Public User Box Complete the following steps:...
Page 237: Other
Other Other 5.6.1 Q1. Can more than one computer use the same settings for the printer driver A1. Yes. The same settings can be configured using Driver Packaging Utility. The Driver Packaging Utility can be used to create an install package with various settings registered for a printer driver.
Page 238: Operation Procedure: Executing The Install Package
Other Settings Description [Package Name] Enter a name for the install package. A folder is created for the install package under the name entered here. [Comment] Enter description of the install package. [Switch to the following Check the box and fill [User Name], [Password] and [Domain Name], and the user when executing user is switched to the specified user when the install package is executed.
Page 239 Other Tap [Function Permission/Authority] - [Function Permission] to set the limit for the respective functions. Settings Description [Copy] To allow using the full copy function, select [Full Color/Black]. To allow copying in black and white only, select [Black Only]. To prohibit copying, select [Re- strict].
Page 240: Q3. Can I Change The Keying And Operation Sounds Of This Machine
Other 5.6.3 Q3. Can I change the keying and operation sounds of this machine? A3. Can delete the operation sound of the Touch Panel, and adjust the sound type and volume. How to set Tap [Accessibility] and select [Sound Setting]. To set whether to output keying and other sounds, select [Sound Setting] and set whether to output respective sounds.
Page 241 Other Settings Description [Batch Setting] All the sound type and volume will be set at once. Select the sound type from six types and select the sound volume from [High], [Medium], or [Low] for ad- justment. [Individual Setting] All the sound type and volume will be set separately. To set the sound type and volume separately, tap [Individual Setting] - [Alter Settings Individually].
Page 242 Other Settings Description [Completed Preparation Sound] Set the sound type and volume when the preparation of this machine has completed. Select the sound type from six types and select the sound volume from [High], [Medium], or [Low] for adjustment. [Caution [Low Caution Set the volume of sound output when a message is displayed on the Sound]...
Page 243: Q4. User Authentication Seems To Be Enabled On This Machine. How Can I Be Authenticated And Allowed To Operate This Machine
Other 5.6.4 Q4. User authentication seems to be enabled on this machine. How can I be authenticated and allowed to operate this machine? A4. Check with the administrator whether you are a user registered in this machine. If you are a registered user, obtain the user name and password from the administrator, perform user authen- tication using this machine, printer driver, and log in to this machine.
Page 244: Q5. The Power Is Input All Day. Is There Any Way To Alleviate Concerns About Electricity Charges
Other Select [Recipient User], enter the [User Name] and [Password] that are registered in the machine, then click [OK]. Click [OK]. Click [Print]. After successful user authentication, the file is printed. 5.6.5 Q5. The power is input all day. Is there any way to alleviate concerns about electricity charges? A5.
Page 245: How To Set
Other How to set Tap [Utility], then select [Administrator Settings]. Enter the password, then tap [OK]. Select [System Settings] - [Weekly Timer Settings] - [Weekly Timer ON/OFF Settings]. Select [ON], select [ErP Auto Power OFF] or [Sleep], then tap [OK]. % Select [ErP Auto Power OFF] when there is no need to receive a job in the power save mode and you wish to cut off power consumption whenever you can.
Page 246 Other Select a year and a month in [Year] and [Month], select dates on the calendar, then tap [OK]. % You can also use the batch setting by tapping [ON] or [OFF] in the Daily Setting section. To switch to the power save mode temporarily, such as during a lunch break, tap [Select Time for Power Save].
Page 247: Q6. What Action Should Be Taken If The Administrator Password Is Lost
Other 5.6.6 Q6. What action should be taken if the administrator password is lost? A6. The administrator password is set to [1234567812345678]by factory default. Try this password if the ad- ministrator password has not been changed. Change the administrator password periodically. If it has been changed, contact your service representative.
Page 248: Troubleshooting
Troubleshooting...
Page 249: Main Messages And Remedies
Main messages and remedies Troubleshooting Main messages and remedies 6.1.1 When a message appears to replace consumables or carry out cleaning A message appears indicating the time(s) that expiring consumables used in this machine should be re- placed. Also, a message appears when the Slit Scan Glass is dirty. Replace consumables mentioned in the displayed message or clean the Slit Scan Glass.
Page 250: When An Error Message Appears
Main messages and remedies Check the following items: Check for any pieces of paper left in the back of the section indicated on the Touch Panel. If the paper cannot be easily removed, do not continue; instead contact your service representative. Once again, open and close the door at the section with the location number indicated on the Touch Panel.
Page 251: When Printing Quality Has Deteriorated
When printing quality has deteriorated When printing quality has deteriorated 6.2.1 Cleaning the Print Head Glass Printing quality deteriorates if the Print Head Glass is dirty. If this occurs, clean the Print Head Glass ac- cording to the following procedure. Pull out Tray 2.
Page 252 When printing quality has deteriorated Release the Waste Toner Box Lock Lever, then remove the Waste Toner Box. Slowly insert the Printhead Cleaner all the way to the back end of the Print Head Glass, and then slowly pull it out. % Repeat this operation approximately three times for all the Print Head Glass sections.
Page 253: When The Machine Cannot Be Powered On
When the machine cannot be powered on When the machine cannot be powered on This machine has two power sources. Check the Main Power Switch and the Power key for the status. Check whether the power plug of this machine is firmly plugged into the power outlet. Also check that the breaker has not tripped.
Page 254: When The Touch Panel Is Not Visible
When the Touch Panel is not visible When the Touch Panel is not visible If a certain length of time has elapsed without any operations being carried out on this machine, the Touch Panel may turn off. Check the following items: Tap [Accessibility] and select [Brightness Adjustment], and select [Low] or [High] to adjust the contrast for the Touch Panel.
Page 255: When A Message Appears To Replace Consumables Or Carry Out Cleaning
When a message appears to replace consumables or carry out cleaning When a message appears to replace consumables or carry out cleaning When staples in the Finisher have run out When staples in the Finisher have run out, a message appears to prompt you to make replenish them. Take action while referring to the label inside the machine.
Page 256: When The Punch Scrap Box Is Full
When a message appears to replace consumables or carry out cleaning When the punch scrap box is full When the punch scrap box is full, a message appears to prompt you to dispose of the punch scraps (at re- placement by user). Take action while referring to the label inside the machine.
Page 257: When It Is Time To Replace An Imaging Unit
When a message appears to replace consumables or carry out cleaning Tips Do not replace a Toner Cartridge of a color that is not displayed. When it is time to replace a Toner Cartridge of a color other than black, printing can be forcibly con- tinued using black.
Page 258: Replacing A Toner Cartridge
When a message appears to replace consumables or carry out cleaning 6.5.1 Replacing a Toner Cartridge The following example shows how to replace a Black Toner Cartridge. Tips Shake a new Toner Cartridge well, approximately 5 to 10 times, before installing it. If a Toner Cartridge other than for black is empty, printing can be continued forcibly using black.
Page 259: Replacing A Waste Toner Box
When a message appears to replace consumables or carry out cleaning 6.5.2 Replacing a Waste Toner Box Tips After removing the Waste Toner Box, quickly install the cap. If the Waste Toner Box is tilted, waste toner may spill. Your service representative will collect your used Waste Toner Box. Place a cap on it, put it in a plastic bag, and store it in a box by itself.
Page 260: Replacing An Imaging Unit
When a message appears to replace consumables or carry out cleaning 6.5.3 Replacing an Imaging Unit Tips Your service representative will collect your used Imaging Unit. Put it in a black plastic bag and store it in a box by itself. An Imaging Unit may be damaged due to exposure to light.
Page 261: Replacing A Staple Cartridge
When a message appears to replace consumables or carry out cleaning 6.5.4 Replacing a Staple Cartridge Finisher FS-537/Finisher FS-537 SD Tips The figure shows the Finisher FS-537 SD equipped with Punch Kit PK-523, Z Folding Unit ZU-609, and Relay Unit RU-515. Do not remove staples that remain in the machine.
Page 262: Finisher Fs-536/Finisher Fs-536 Sd
When a message appears to replace consumables or carry out cleaning Finisher FS-536/Finisher FS-536 SD Tips The figure shows the Finisher FS-536 SD equipped with Punch Kit PK-520 and Relay Unit RU-515. Do not remove staples that remain in the machine. Otherwise, the stapling function will activate but no sheets will be stapled.
Page 263: Replacing A Saddle Staple Cartridge
When a message appears to replace consumables or carry out cleaning 6.5.5 Replacing a Saddle Staple Cartridge Finisher FS-537 SD Tips The figure shows the Finisher FS-537 SD equipped with Punch Kit PK-523, Z Folding Unit ZU-609, and Relay Unit RU-515. Do not remove staples that remain in the machine.
Page 264: Finisher Fs-536 Sd
When a message appears to replace consumables or carry out cleaning Finisher FS-536 SD Tips The figure shows the Finisher FS-536 SD equipped with Punch Kit PK-520 and Relay Unit RU-515. Do not remove staples that remain in the machine. Otherwise, the stapling function will activate but no sheets will be stapled.
Page 265 When a message appears to replace consumables or carry out cleaning 6-18 bizhub C759/C659, AccurioPrint C759...
Page 266 Index...
Page 267 Index Address Book ............3-57 PC-Fax TX ..............3-47 Advanced Functions ...........4-2 PCL ................3-6 Power Save mode ............. 2-21 Print Function ............3-2 Control Panel .............2-23 Printing from a USB memory device ......3-71 Copy function ............3-54 PS ................3-6 Dialing Method ............3-44 Quick Security ............

This manual is also suitable for:

Bizhub accurioprint c759Bizhub c759Bizhub c3100p

Konica Minolta bizhub C659 Quick Start Manual

Quick Links

Related Manuals for Konica Minolta bizhub C659

Summary of Contents for Konica Minolta bizhub C659