Field Service Ver. 1.0 Jul. 2007
Maintenance
2.
Periodical check
2.1
Maintenance procedure (Periodical check parts)
NOTE
• The alcohol described in the cleaning procedure of maintenance represents the
isopropyl alcohol.
2.1.1
Pick-up roller/feed roller
A. Periodically cleaning parts/cycle
• Pick-up roller: Every 50,000 prints
• Feed roller: Every 50,000 prints
B. Periodically replaced parts/cycle
• Pick-up roller: Every 200,000 prints
• Feed roller: Every 200,000 prints
C. Cleaning procedure
1. Open the feed cover.
See P.16
[2]
D. Replacing procedure
1. Open the feed cover.
See P.16
[1]
9J07F2C507DA
[2]
[1]
A01HF2C001DA
2. Periodical check
2. Wet a cloth with alcohol, and use it to
wipe up the pick-up roller [1] and
feed roller [2].
2. Remove four screws [1] and remove
the cover [2].
5