Switchback Roller Feed Clutch (Cl11) - Konica Minolta magicolor 4690MF Service Manual

7. Other
[5]
[4]
7.3.34

Switchback roller feed clutch (CL11)

1. Remove the PWB box.
See P.77
[2]
90
[2] [3]
[4] [1]
A00FF2C077DA
[5]
[1] [2] [3]
A00FF2C079DA
[1]
A0FDF2C068DA
Field Service Ver. 1.0 May 2008
5. Remove the lever [1], gear/1 [2],
gear/2 [3], and the bearing [4].
6. Remove the 2nd image transfer
pressure/retraction drive assy [5].
NOTE
• When the media feed clutch/1 is
reinstalled, replace the gears that
have been removed, as these gears
could have been damaged.
7. Remove the C-clip [1] and remove
the bearing [2].
8. Remove the pressure/retraction
clutch/2 [3].
Precautions for reinstallation
• When reinstalling the bearing and
pressure/retraction clutch/2, make
sure that the protrusion [4] on the
pressure/retraction clutch/2 fits into
the locking slot [5].
2. Remove two screws [1], and remove
the switchback roller clutch unit [2].