TECHNOGYM RUN Technical Service Guide
Rev. 1.0
7.12 DISASSEMBLING THE STOP BUTTON
Perform the procedures illustrated in the videos in the attached folder, according to the following
sequence:
• After removing the front handle bar and joystick as described in the video:
9 - Disassembling the front handle bar and joystick
• Proceed with:
10 - Disassembling the stop button
7.13 DISASSEMBLING THE LATERAL HANDLEBAR
Perform the procedures illustrated in the videos in the attached folder, according to the following
sequence:
• After removing the front handle bar and joystick as described in the video:
9 - Disassembling the front handle bar and joystick
• Proceed with:
11 - Disassembling the lateral handlebar
7.14 DISASSEMBLING THE UPPER CASING
Perform the procedures illustrated in the videos in the attached folder, according to the following
sequence:
12 - Disassembling the upper casing
7.15 DISASSEMBLING THE BOTTOM CASING
Perform the procedures illustrated in the videos in the attached folder, according to the following
sequence:
13 - Disassembling the bottom casing
TSG-00284-EN - Uncontrolled copy if printed
- 99 -