System Settings
LAN Settings
LAN Settings
Configure the LAN settings to be used to communicate with the Data Link
Software. Learn more about Data Link at:
www.keysight.com/find/fieldfoxsupport.
Table 14-1
LAN LEDs (Applies to N9912A units with serial number prefixes ≥5607)
LAN LEDs (Applies to N9912A units with serial number prefixes ≥5607)
When FieldFox is connected to the LAN, the flashing LAN LEDs have the following
definitions:
Green: Flashing indicates packets are being transferred.
Yellow:
— Flash, pause = 10 Mbit link speed
— Flash, flash, pause = 100 Mbit link speed
— Flash, flash, flash, pause = 1 GBit link speed
How to configure LAN settings
The first three 'Current...' settings can NOT be edited.
— Press System 7.
— Then
— Then LAN.
— Use the
— Hostname Change the name that can be used to address the FieldFox if
— Obtain IP Choose from:
Keysight N9923-90001 User's Guide
System
Configuration.
arrows to select one of the following, then press
your server supports this feature. The default hostname is generated
automatically.
Ed
it.
231