Table of Contents
Advertisement
System Settings
Preferences
Startup Mode
The Startup Mode setting determines the mode that becomes active (visible)
when User Preset is set to OFF (Factory Preset) and the FieldFox is powered
ON. See
How to setup Startup Mode
— Press System 7
— Then
— Then
— Then scroll to Global Settings > Startup Mode and press
— Then repeatedly press the
Display
Choose the Display values (Display Colors, Trace Width, Brightness, Title
Enabled, Title). See
How to select Display values:
— Press System 7
— Then
— Then
— Then use arrow softkeys or the knob to select Display
— Then
— Trace Width
— Brightness
Keysight N9923-90001 User's Guide
"User Preset" on page
Preferences
Preferences
choices.
—<Default>
is the factory default mode for your FieldFox model.
—Built-in Power Meter Mode is NOT allowed as a Startup Mode.
"Display Settings" on page
Preferences
Preferences
Ed it
for each of the following:
— Display Colors
— Indoor (default)
— Night Vision
— Outdoor Sun
— Outdoor Dusk
— Outdoor Clouds
— Normal (default)
— Wide
209.
Startup Mode
to scroll through the available
211.
Ed
it.
217
Advertisement
Table of Contents
