Set File Type And Select Device - Keysight N9923A User Manual

File Management
Saving and Recalling Files
— Then
— Then
— Then
— Then
— Navigate to the file(s) to be copied using the Up/Down arrow keys or the
— Then
— Use the close folder icon or the open folder icon to locate the target folder
— Then
—

Set File Type and Select Device

The following File TYPE and DEVICE settings are used to determine the type of
file to save, and the location to be used for all file operations.
These two settings remain through an instrument preset, but are reset to the
default values when the FieldFox power is shutdown.
Select Device (location of File Save/Recall)
— Press Save/Recall 9
— Then
196
Device
to be copied from (i.e., Internal, SD, or USB). Refer to
File Type and Select Device" on page
More
Manage Files
Select Files
knob.
Copy
—Select the destination device using the softkeys:
Copy to Internal
——
Copy to USB
——
Copy to SD Card
——
——Cancel to cancel copy file and return to the previous menu
for your files.
Do Copy
copies files to selected location and FieldFox displays a
confirmation message of a successful file copy.
Cancel
to cancel copy file and return to the previous menu.
Device to set the LOCATION where the file is to be saved, recalled, or
moved. Choose from the following:
Internal
— Saves/Recalls/Moves (Copies) files to/from the FieldFox
internal memory. To specify a folder, first select Manage Folders
"Manage Folders" on page
(learn how in
will read data ONLY from the \UserData folder.
—SD Card
Saves/Recalls/Moves (Copies) files to/from the SD card (not
included), inserted in the card slot. See
page 27. Only the root folder is available.
196.
Copies to FieldFox's internal memory.
Copies to a USB memory device.
Copies to a SD/SDHC memory card.
200). The Data Link software
"Take the FieldFox Tour" on
Keysight N9923-90001 User's Guide
"Set