Table of Contents
Advertisement
Data Analysis Features
All about Markers
How to Create a Delta Marker
— Create a Normal marker and move it to the reference position.
— Press Delta. The marker becomes the reference marker and fixed in its
— Move the delta marker using the numeric keypad, the
— Press Enter when finished.
How to move the Reference marker
— Press
— Move the marker to the new position.
— Then press
Marker Table
The Marker Table can be displayed at the bottom of the FieldFox screen. It can
display information for up to 6 markers in a full-width window, and up to 3
markers for a half-width window (NA mode). The marker table "squeezes" the
graticule area when activated.
How to display the Marker table
— Press Marker.
— Then
— Then
Coupled Markers
Coupled Markers, available in NA mode only, allows you to simultaneously
create and move markers that have the same number for all traces. For
example, when marker 2 is created on a trace, a marker 2 is created for ALL
traces. When any marker 2 is moved, they all move together to the same
X-axis position.
— Coupled markers are allowed only in NA mode and are relevant only in
— You can have markers that are coupled and others that are uncoupled.
— Peak functions move the marker to the peak on the active trace, while all
176
X-Axis position.
rotary knob.
Delta
to turn the Delta marker OFF.
Delta
again, to turn the Delta marker back ON.
More
Marker Table On
multi-trace configurations.
other markers move to the same X-axis position.
Off.
Keysight N9923-90001 User's Guide
arrows, or the
Advertisement
Table of Contents
