System Settings
Preset
Preset
The Preset key restores the FieldFox measurement settings to a known
condition. You can preset the entire instrument, or just the current Mode (CAT,
NA, and Power Meter).
When Preset, the FieldFox CalReady calibration is recalled for use in CAT and
NA Modes. Learn more in
In addition to all Preference settings, the following settings always survive
Preset and Mode Preset:
— External Reference state (see
— VVM Display Resolution (see
— Marker Peak Excursion and Threshold (see
How to Preset the FieldFox
— Press Preset.
— Then choose one of the following:
User Preset
User Preset allows you to store custom settings for each mode, then recall the
settings when the Preset key is pressed. Your custom settings are saved to a
standard State file (UserPreset.sta). However, unlike State files, calibration
data is NOT saved. Learn more about State files in
on page
How to set User Preset
— Make your custom settings for all modes.
— When finished, press Preset.
— Then
— Then
How to recall User Preset
— Press Preset.
— Then choose from the following:
Keysight N9923-90001 User's Guide
"CalReady" on page
—Preset
Returns ALL Modes to the factory default settings.
—Mode Preset
Returns only the current Mode to the factory default
settings. The current settings for all other Modes remain.
192.
Save User Preset,
User Preset ON
104.
"Frequency Reference Source" on page
"Display Resolution" on page
"What Is a 'Peak'" on page
"Saving and Recalling Files"
Yes
then select
to confirm.
226)
164)
182)
209