Marker Colors; Marker Trace - Keysight N9923A User Manual

Data Analysis Features
All about Markers
Figure 12-3 Coupled Markers move on ALL traces at the same time.
How to create Uncoupled Markers
Markers are coupled by default.
To create markers that are NOT coupled (move independently on each trace):
— Press Marker
— Then
— Then

Marker Colors

As shown in the above image, in NA and CAT Modes, markers are the same
color as the trace to which they are assigned. I
Marker colors can NOT be changed.

Marker Trace

Both CAT and NA Modes can display a data trace and a memory trace. By
default, markers are assigned to the data trace. However, you can move a
marker between the data and memory trace. The marker moves to the same
X-axis location on the specified trace.
When Coupled Markers is ON, this setting applies to the active marker for ALL
traces that are coupled. Otherwise, this setting applies to the active marker on
only the active trace.
Keysight N9923-90001 User's Guide
More
Coupled Markers OFF
177