Gps - Keysight N9923A User Manual

System Settings
System Configuration
For more information about Licensing, see the FieldFox Service Manual at:
http://na.support.keysight.com/fieldfox.

GPS

GPS (Global Positioning System) allows you to 'stamp' each data trace with
your physical position in latitude/longitude/elevation format. This can be
useful when making measurements on cell towers or other antennas at remote
locations.
This feature is usable ONLY with the GPS receiver that is shipped with
Microsoft "Streets and Trips" and "AutoRoute". The GPS receiver is NOT
available from Keysight. Only the GPS USB receiver is used with the
FieldFox. Therefore, it is NOT necessary to purchase the very latest version
of the map software.
— GPS can be used in all FieldFox modes.
— Your GPS settings can be saved with Preferences. Learn more on page
How to make GPS settings
— Press System 7
— Then
— Then
— Then choose from the following:
—
—
When External is selected, a search is made for satellites overhead. GPS works
best when outdoors and in full view of the open sky. When several satellites
are found, the following screen appears (when Display is set to ON) and is
updated frequently:
As the bar graph count exceeds 9 bars, the "dB" text is dropped from the
number displayed on the bar. Units for C/No are dBHz.
Keysight N9923-90001 User's Guide
"Preferences" on page
System Configuration
GPS
Display ON OFF
Enable and disable the GPS display on the FieldFox main
window.
GPS
OFF
— - Disable GPS (default setting).
External
— - Enable GPS using an external, customer-supplied, USB
dongle device. A check is made to detect a USB GPS device at the
USB connectors.
213.
223