Pulse Measurements Mode – Option 330
Pulse Measurement Settings
— Press
— Then choose from the following:
Marker Search
Use Marker Search to find and move markers to locations on the Tr 1 trace.
How to Search with Markers
— Activate the marker to be used for the search
— Then press Mrk ->/Tools.
— Then
— Then
— Then choose from the following:
Then choose from the following:
— Target, Peak, and Minimum. Learn more about these standard features
—
—
Rise and Fall time in Marker Search uses different criteria than in Auto
Analysis and will therefore result in different reported values.
156
Delta Ampl Mkr
ON
—
AmplMkr 2 value is relative to AmplMkr 1. When AmplMkr 1 is
moved, AmplMkr 2 also moves to maintain the AmplMkr 2 value
between them.
OFF
—
The two amplitude markers move independent of one another.
Marker Search
Zone Search
ON
—
Available ONLY when the zoom window is enabled, the search is
limited to the zone defined by the zoom window.
OFF
—
The search is performed over the entire Tr 1 trace.
beginning in
"Searching with Markers" on page
Rise Time
Select, then set a value in dB. Delta markers are created and
placed at the Peak and at the specified value BEFORE the Peak.
Fall Time
Select, then set a value in dB. Delta markers are created and
placed at the Peak and at the specified value AFTER the Peak.
179.
Keysight N9923-90001 User's Guide