Preface
Related Materials
Chapter 5, Linux Driver Software
Chapter 6, VMware Driver Software
Chapter 7, Firmware Upgrade
firmware upgrade utility.
Chapter 8, iSCSI Protocol
iSCSI offload for Windows, Linux, and VMware.
Chapter 9, Fibre Channel Over Ethernet
and booting from SAN after installation.
Chapter 10, NIC Partitioning and Bandwidth Management
NPAR operating system requirements and the NPAR configuration
parameters.
Chapter 11, Virtual LANs in Windows
the physical LAN into functional segments.
Chapter 12, SR-IOV
(SR-IOV) to virtualize network controllers and how to enable SR-IOV.
Chapter 13, Microsoft Virtualization with Hyper-V
Microsoft
Chapter 14, Data Center Bridging (DCB)
configuration, and requirements.
Chapter 15, QLogic Teaming Services
multiple physical devices to provide fault tolerance and load balancing.
Chapter 16, Configuring Teaming in Windows Server
configuration for Windows Server
Chapter 17, User Diagnostics in DOS
application that runs diagnostic tests, updates device firmware, and
manages adapter properties.
Chapter 18,
and resources.
Appendix A, Adapter LEDS
significance.
Related Materials
For information about downloading documentation from the QLogic Web site, see
"Downloading Updates" on page
describes iSCSI boot, iSCSI crash dump, and
describes the use of Single-Root I/O Virtualization
®
®
Hyper-V
for Windows Server 2008 and 2012.
Troubleshootingdescribes a variety of troubleshooting methods
describes the adapter LEDs and their
xxv.
xxii
describes the Linux
describes the VMware
describes the installation and use of the
describes FCoE boot from SAN
describes the use of VLANs to divide
describes the use of
describes the DCB capabilities
describes the use of teaming to group
®
operating systems.
describes the MS-DOS based
®
drivers.
®
drivers.
describes the
describes the teaming
83840-546-00 E
Need help?
Do you have a question about the FastLinQ 3400 Series and is the answer not in the manual?
Questions and answers