No Valid License To Start Fcoe - Qlogic FastLinQ 3400 Series User Manual

5–Linux Driver Software
Driver Messages

No Valid License to Start FCoE

bnx2fc: FCoE function not enabled <ethX>
bnx2fC: FCoE not supported on <ethX>
Session Failures Due to Exceeding Maximum Allowed FCoE
Offload Connection Limit or Memory Limits
bnx2fc: Failed to allocate conn id for port_id <remote port id>
bnx2fc: exceeded max sessions..logoff this tgt
bnx2fc: Failed to allocate resources
Session Offload Failures
bnx2fc: bnx2fc_offload_session - Offload error
<rport> not FCP type. not offloading
<rport> not FCP_TARGET. not offloading
Session Upload Failures
bnx2fc: ERROR!! destroy timed out
bnx2fc: Disable request timed out.
bnx2fc: Disable failed with completion status <status>
bnx2fc: Destroy failed with completion status <status>
Unable to Issue ABTS
bnx2fc: initiate_abts: tgt not offloaded
bnx2fc: initiate_abts: rport not ready
bnx2fc: initiate_abts: link is not ready
bnx2fc: abort failed, xid = <xid>
Unable to Recover the IO Using ABTS (Due to ABTS Timeout)
bnx2fc: Relogin to the target
Unable to Issue IO Request Due to Session Not Ready
bnx2fc: Unable to post io_req
Drop Incorrect L2 Receive Frames
bnx2fc: FPMA mismatch... drop packet
bnx2fc: dropping frame with CRC error
HBA/lport Allocation Failures
bnx2fc: Unable to allocate hba
bnx2fc: Unable to allocate scsi host
NPIV Port Creation
bnx2fc: Setting vport names, <WWNN>, <WWPN>
destroy not set to FW
46 83840-546-00 E