Qlogic FastLinQ 3400 Series User Manual page 232

15–QLogic Teaming Services
General Network Considerations
Furthermore, a failover event would cause additional loss of connectivity.
Consider a cable disconnect on the Top Switch port 4. In this case, Gray would
send the ICMP Request to Red 49:C9, but because the Bottom switch has no
entry for 49:C9 in its CAM Table, the frame is flooded to all its ports but cannot find
a way to get to 49:C9.
Figure 15-3. Teaming Across Switches Without an Interswitch Link
204 83840-546-00 E