Virtual Bus Driver - Qlogic FastLinQ 3400 Series User Manual

15–QLogic Teaming Services
Event Log Messages
Table 15-8. Intermediate Driver Event Log Messages (Continued)
System
Event
Severity
Message
Number
17 Informational
18 Informational
19 Informational
20 Informational

Virtual Bus Driver

Message
Severity
Number
1 Error
Message
Network adapter is
activated and is partic-
ipating in network traf-
fic.
Network adapter is
de-activated and is no
longer participating in
network traffic.
The LiveLink feature in
QLASP connected the
link for the network
adapter.
The LiveLink feature in
QLASP disconnected
the link for the network
adapter.
Table 15-9. VBD Event Log Messages
Message
Failed to allocate
memory for the device
block. Check system
memory resource
usage.
230
Cause
A physical adapter has
been added to or acti-
vated in a team.
The driver does not
recognize the installed
adapter.
The connection with
the remote target(s)
for the
LiveLink-enabled team
member has been
established or restored
The LiveLink-enabled
team member is
unable to connect with
the remote target(s).
Cause
The driver cannot allo-
cate memory from the
operating system.
Corrective Action
No action is required.
No action is required.
No action is required.
No action is required.
Corrective Action
Close running applica-
tions to free memory.
83840-546-00 E