Installing The Source Rpm Package - Qlogic FastLinQ 3400 Series User Manual

5–Linux Driver Software
Installing Linux Driver Software

Installing the Source RPM Package

The following are guidelines for installing the driver source RPM Package.
Prerequisites:

Linux kernel source

C compiler
Procedure:
1. Install the source RPM package:
rpm -ivh netxtreme2-<version>.src.rpm
2. Change the directory to the RPM path and build the binary RPM for your
kernel:
For RHEL:
cd ~/rpmbuild
rpmbuild -bb SPECS/netxtreme2.spec
For SLES:
cd /usr/src/packages
rpmbuild -bb SPECS/netxtreme2.spec
3. Install the newly compiled RPM:
rpm -ivh RPMS/<arch>/netxtreme2-<version>.<arch>.rpm
Note that the --force option may be needed on some Linux distributions if
conflicts are reported.
4. For FCoE offload, install the open-fcoe utility.
For RHEL 6.4 and legacy versions, either of the following:
yum install
fcoe-utils-<version>.rhel.64.qlgc.<subver>.<arch>.rpm
-or-
rpm -ivh
fcoe-utils-<version>.rhel.64.qlgc.<subver>.<arch>.rpm
For SLES11 SP2:
rpm -ivh
open-fcoe-<version>.sles.sp2.qlgc.<subver>.<arch>.rpm
28 83840-546-00 E