Qlogic FastLinQ 3400 Series User Manual page 137

8–iSCSI Protocol
iSCSI Offload in Windows Server
Message
Number
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
Table 8-5. Offload iSCSI (OIS) Driver Event Log Messages
Severity
Error Target failed to respond in time to a logout request sent in
response to an asynchronous message from the target.
Error Initiator Service failed to respond in time to a request to con-
figure IPSec resources for an iSCSI connection.
Error Initiator Service failed to respond in time to a request to
release IPSec resources allocated for an iSCSI connection.
Error Initiator Service failed to respond in time to a request to
encrypt or decrypt data.
Error Initiator failed to allocate resources to send data to target.
Error Initiator could not map an user virtual address to kernel vir-
tual address resulting in I/O failure.
Error Initiator could not allocate required resources for processing
a request resulting in I/O failure.
Error Initiator could not allocate a tag for processing a request
resulting in I/O failure.
Error Target dropped the connection before the initiator could tran-
sition to Full Feature Phase.
Error Target sent data in SCSI Response PDU instead of Data_IN
PDU. Only Sense Data can be sent in SCSI Response.
Error Target set DataPduInOrder to NO when initiator requested
YES. Login will be failed.
Error Target set DataSequenceInOrder to NO when initiator
requested YES. Login will be failed.
Error Cannot reset the target or LUN. Will attempt session recov-
ery.
Information Attempt to bootstrap Windows using iSCSI NIC Boot (iBF).
Error Booting from iSCSI, but could not set any NIC in Paging
Path.
Error Attempt to disable the Nagle Algorithm for iSCSI connection
failed.
Information If Digest support selected for iSCSI Session, will use Pro-
cessor support for Digest computation.
Message
109 83840-546-00 E