Table of Contents
Advertisement
9–Fibre Channel Over Ethernet
FCoE Boot from SAN
13.
Click OK to proceed and complete installation.
RHEL6 Installation
1.
Boot from the installation medium.
2.
For RHEL6.3, an updated Anaconda image is required for FCoE BFS. That
updated image is provided by Red Hat at the following URL
http://rvykydal.fedorapeople.org/updates.823086-fcoe.img.
3.
For RHEL6.3, on the installation splash screen, press Tab and add the
options dd updates=<URL_TO_ANACONDA_UPDATE_IMAGE> to the boot
command line. Please refer to the Red Hat Installation Guide, Section 28.1.3
(http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Insta
llation_Guide/ap-admin-options.html#sn-boot-options-update) for details
about installing the Anaconda update image. Press ENTER to proceed.
4.
For RHEL6.4 and above, no updated Anaconda is required. On the
installation splash screen press Tab and add the option dd to the boot
command line, as shown in the following screen. Press ENTER to proceed.
137
83840-546-00 E
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the FastLinQ 3400 Series and is the answer not in the manual?
Questions and answers