Qlogic FastLinQ 3400 Series User Manual page 253

15–QLogic Teaming Services
Event Log Messages
Table 15-7. Base Driver Event Log Messages (Continued)
Message
Severity
Number
3 Error
4 Warning
5 Informational
6 Informational
7 Informational
8 Informational
9 Informational
10 Informational
Message
Failed to access
configuration infor-
mation. Reinstall the
network driver.
The network link is
down. Check to
make sure the net-
work cable is prop-
erly connected.
The network link is
up.
Network controller
configured for 10Mb
half-duplex link.
Network controller
configured for 10Mb
full-duplex link.
Network controller
configured for
100Mb half-duplex
link.
Network controller
configured for
100Mb full-duplex
link.
Network controller
configured for 1Gb
half-duplex link.
225
Cause
The driver cannot
access PCI configura-
tion space registers on
the adapter.
The adapter has lost its
connection with its link
partner.
The adapter has estab-
lished a link.
The adapter has been
manually configured for
the selected line speed
and duplex settings.
The adapter has been
manually configured for
the selected line speed
and duplex settings.
The adapter has been
manually configured for
the selected line speed
and duplex settings.
The adapter has been
manually configured for
the selected line speed
and duplex settings.
The adapter has been
manually configured for
the selected line speed
and duplex settings.
Corrective Action
For add-in adapters:
reseat the adapter in
the slot, move the
adapter to another PCI
slot, or replace the
adapter.
Check that the network
cable is connected, ver-
ify that the network
cable is the right type,
and verify that the link
partner (for example,
switch or hub) is work-
ing correctly.
No action is required.
No action is required.
No action is required.
No action is required.
No action is required.
No action is required.
83840-546-00 E