Dhcp Boot Setup For Iscsi Boot (Ipv4); Iscsi Boot Setup Using Qcc Cli; Configuring Iscsi Boot Using The Qcc Cli; Configuring Iscsi Dhcp Boot Options Using Qcc Cli - Qlogic 8200 Series User Manual
Converged network adapters and intelligent ethernet adapters
Hide thumbs
Also See for 8200 Series:
- User manual (130 pages) ,
- User manual (300 pages) ,
- User manual (430 pages)
Table of Contents
Advertisement
3–Configuring iSCSI
iSCSI Boot
4.
Start the system; press Ctrl+Q when the BIOS screen for the QLogic
Adapter opens.
The Fast!UTIL Options menu opens.
5.
Select Configuration Settings.
6.
Select Host Adapter Settings.
7.
Enable the Host Adapter BIOS.
8.
Press ESC to exit the Host Adapter Settings window.
9.
Select iSCSI Boot Settings.
10.
Enable iSCSI Boot.
DHCP Boot Setup for iSCSI Boot (IPv4)
DHCP boot provides a method for the iSCSI initiator to acquire target parameters
from a DHCP server. To configure the DHCP server to support iSCSI boot, first
ensure that your DHCP server is set up.
iSCSI Boot Setup Using QCC CLI
Refer to the QConvergeConsole CLI User's Guide for information.
Configuring iSCSI Boot using the QCC CLI
Refer to the QConvergeConsole CLI User's Guide for information.
Configuring iSCSI Boot using Interactive QCC CLI
Refer to the QConvergeConsole CLI User's Guide for information.
Configuring iSCSI Boot using Non-interactive QCC CLI
Refer to the QConvergeConsole CLI User's Guide, "iSCSI Noninteractive
Commands" section for information.
Configuring iSCSI DHCP Boot Options using QCC CLI
Refer to the QConvergeConsole CLI User's Guide, "iSCSI Noninteractive
Commands" section for information.
Configuring iSCSI DHCP Boot Options using Interactive QCC CLI
Refer to the QConvergeConsole CLI User's Guide for information.
Configuring iSCSI DHCP Boot Options using Non-interactive QCC CLI
Refer to the QConvergeConsole CLI User's Guide, "iSCSI Noninteractive
Commands" section for information.
3-8
SN0054671-00 B
Advertisement
Table of Contents
Troubleshooting
